2013 Vermeer BC1000XL 12″ Wood Chipper
2013 Vermeer BC1000XL
Powered by Cat Diesel Engine
Hour meter reads: 2,969
12” Chipping Capacity!
Drum Chipper
New Belt and Knifes
Pintle Hitch
Good Tires!
Just Serviced, Greased and Ready to Work!
2011 Peterbilt 337 Flatbed Conveyor Belt Truck
2011 Peterbilt 337
Paccar PX-6 Turbo Diesel
-325HP
Allison Automatic Transmission
Odometer reads: 136,401 Miles
A/C and Heat
AM/FM Radio
Air Ride Driver Seat + Passenger Bench Seat
GVWR: 46,200
WB: 239”
– Drop Axle
Air Brakes
Locking Diff
Engine Brake
Strobe Lights
Overall Bed Length: 25’
Good tires all around!
Equipped with the following:
LiftMaster Telescopic Hydraulic Conveyor Boom
-Boom Length: 39′
16″ Chain Conveyor
Rotational Boom Platform
Hydraulic Sliding Extension
Two Downriggers
Hydraulic Load Push Bar
Hydraulic Raise Bed Platform
Truck was just Serviced, Greased and Vehicle Inspected!
CHECK OUT OUR FULL WALK AROUND AND OPERATION VIDEO OF THIS TRUCK BELOW!
2011 International 4300 Altec Material Handler Bucket Truck
2011 International 4300
MaxxforceDT Turbo Diesel
-Full OEM Works kit just installed!
Allison Automatic Transmission
Odometer reads: 81,158 Miles
PTO Hours: 1,624 Hours
A/C and Heat
AM/FM Radio
Bench Seat
Air Brakes
GVWR: 33,000
Trailer Air Hook Up
Pintle Hitch
WB: 189″
14′ Utility Storage Bed
Good Tires all around
Equipped with the following:
Altec AM55E Boom
55’ Platform Height / 60’ Working Height
-Rear Mounted Boom
-Over center Aerial Device with Altec Patented Walking Link System
Two Man Bucket
Rated for 700lbs
Hydraulic Platform Tilt
Hydraulic Platform Rotator
Hydraulic Lifting Platform
Two Sets of Hydraulic Tool Circuits at Each Platform
Material Handling System with Manually Extendable Jib
Rated for 2,000lbs
Boom is insulated for 46kv
Continuous Rotation
4 Outriggers
Upper/ Lower Controls
-Lever Lowers / Pistol Grip Uppers
Emergency Stop Valves at All Upper and Lower Control Stations
Outrigger Boom Interlock System Automatic Upper Boom Stow System
Altec Boom was ANSI/Dielectrically tested!
Truck was Serviced, Greased and Vehicle Inspected!
CHECK OUT OUR FULL WALK AROUND AND OPERATION VIDEO OF THIS TRUCK BELOW
2006 International 4200 UNDER CDL Chipper Dump Truck
2006 International 4200
VT365 Turbo Diesel
Allison Automatic Transmission
Odometer reads: 116,112 Miles
4×2
Heat
AM/FM Radio
Reverse Camera
Bench Seat
26,000 GVWR
Air Brakes
WB:175”
Pintle Hitch
12’ Chipper Dump Box
-W/ 2x Removable tops!
Plywood/Ground matt Storage
Utility Storage Compartments
Good tires all around!
Truck will come Serviced, Greased and Vehicle Inspected!
2012 Ford F750 Altec Material Handler Utility Bucket Truck
2012 Ford F750
Cummins 6.7L Turbo Diesel
Eaton 6 Speed Transmission
Odometer reads: 39,239 Miles
4×2
WB: 194″
A/C and Heat
AM/FM Radio
Bench Seat
Air Brakes
Pintle Hitch
Strobe Lights
Front Bumper Cone Holder
33,000 GVWR
14′ Utility Bed Storage Compartments
Good tires all around!
Equipped with the following:
Altec AA755 Boom
55’ Platform Height/ 60’ Working Height
-Rear Mounted Boom
Two Man Bucket
-Rated for 700lbs
Hydraulic Platform Tilt
Hydraulic Rotation Bucket
Two sets of Hydraulic Tool Circuits at platform
Material Handling System with Manual Extendable Jib
-Rated for 2,000lbs
Boom is insulated for 46kv
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Altec Boom will come ANSI/Dielectrically Tested before sold!
Truck will come Serviced, Greased, and Vehicle Inspected before sold!
2008 Ford F750 Under CDL Chipper Dump Truck
2008 Ford F750
Cat C7 Turbo Diesel
Automatic Transmission
Odometer Reads: 45,419 Miles
4X2
WB: 200”
GVWR: 25,999
Hydraulic Brakes
Heat
AM/FM Radio
Bench Seat
Pintle Hitch
10’ 6” Dump Bed
Utility Storage Boxes
50” X 8’ Flat Top for Mini Skid Storage
Good tires all around!
Truck was just Serviced, Greased, and Vehicle Inspected!
2011 Freightliner M2 106 Business Class Altec Material Handler Bucket Truck
2011 Freightliner M2 106 Business Class
Cummins 6.7L Turbo Diesel
Allison Automatic Transmission
Odometer reads:76,502 Miles
4×2
A/C and Heat
AM/FM Radio
Bench Seat
Air Brakes
Trailer Air Hook up
Pintle Hitch
33,000GVWR
Utility Bed Storage Compartments
Rear Capstan Winch
Good Tires all around!
Equipped with the following:
Altec AM55 Boom
55’ Platform Height/ 60’ Working Height
-Rear Mounted Boom
-Over Center Boom
Two Man Bucket
-Rated for 800lbs
Hydraulic Platform Tilt
Hydraulic Rotation Bucket
Two sets of Hydraulic Tool Circuits at platform
Material Handling System with Manual Extendable Jib
-Rated for 2,000lbs
Boom is insulated for 46kv
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at All Upper and Lower Control Station
Automatic Upper Boom Stow System
Boom will come ANSI/Dielectrically Tested before sold!
Truck will come Serviced, Greased, and Vehicle Inspected before sold!
2014 JLG 3248RS Electric Scissor lift
2014 JLG 3248RS
Electric Powered
Hour Meter Reads: 283 Hours
Platform Height: 32’
Working Height: 38’
Platform Rated Capacity: 705lbs
Machine Weight: 5,308lbs
Solid Non-Marking Wheels
Slide out Deck extension
Onboard Charger
Power to Platform
Dimensions: 7’ 7”x4’x7’ 11” (Height W/ Rails Folded: 6’6”)
Operates as it should
2012 Genie GR-20 Electric Vertical Mast Man Lift
2012 Genie GR-20
Electric Powered
Hour Meter reads: 12.6 Hours
Platform Height: 19’9”
Working Height: 25’ 9”
Platform Rated Capacity: 350lbs
Machine Weight: 2,524lbs
Solid Non-Marking Wheels
Slide out Deck extension
Onboard Charger
Power to Platform
Dimensions: 4’ 5” x 2’ 6”x 6’ 6”
Operates as it should
2007 International 7300 4×4 Altec Material Handler Bucket Truck
2007 International 7300
DT466 Turbo Diesel
-NEW Turbo WITH 1 Year Part Warranty
Eaton 6 Speed Transmission
Odometer reads: 92,040 Miles
4×4
GVWR: 33,000
WB: 195”
Front Bumper 20k Winch
Cab Brush Guard
A/C and Heat
AM/FM Radio
Bench Seat
Air Brakes
Trailer Air Hook Up
Pintle Hitch
Bench Seat
Altec 13′ 6” Utility Bed
-Utility Bed Storage Compartments
Good tires all around!
Equipped with the following:
Altec AA755MH Boom
55’ Platform Height/ 60’ Working Height
-Rear Mounted Boom
Two Man Bucket
-Rated for 700lbs
Hydraulic Rotation / Hydraulic Tilt Platform
Hydraulic Tool Circuits at platform
Material Handling System
-Rated for 2,000lbs
Boom is insulated for 46kv
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at All Upper and Lower Control Station
Altec Boom was ANSI/Dielectrically Tested!
Truck was just Serviced, Greased, and Vehicle Inspected!
Recent Comments