2017 Ford F550XL Altec Utility Bucket Truck
2017 Ford F550XL
6.7L Powerstroke Turbo Diesel
Automatic Transmission
Odometer reads: 80,749 Miles
4×2
A/C and Heat
AM/FM radio
Hydraulic Brakes
Bench Seat
18,000 GVWR
Pintle Hitch
9′ Utility Storage Box + 3′ 6″ Rear Bumper Platform_
-w/ Material Storage Bins
Strobe Light
Good tires all around!
Equipped with the following:
Altec AT40-G Boom
40’ Platform Height / 45’ Working Height
-Center Mounted Boom
Man a Half Bucket
-Rated for 400lbs
Hydraulic Platform Tilt
Hydraulic Platform Rotation
Hydraulic Tool outlets at bucket_
Boom is insulated and rated for 46KV
Continuous Rotation
Upper and Lower Controls
-Lever Lowers
-Pistol Grip Uppers
Emergency Stop Valve at upper and lower controls
Altec boom will be ANSI/Dielectrically tested before sold!
Truck will be Serviced, Greased and Vehicle Inspected before sold!
2018 Morbark M12R 12” Wood Chipper 2018 Morbark M12R Powered by 3.0L GM Gas Motor -89HP Hour meter reads: 1,207.1 12” Chipping Capacity! AutoFeed System (Ask and we can send you a video of it operating) Drum Chipper Hydraulic Crush/Opening Feeder Pintle Hitch Decent Tires! New Oil Pan and Gasket Good Running machine that was just Serviced and Greased / Could use cosmetic restoration
2020 Frost Fighter IDH1000QR Indirect Fired Mobile Construction Heater
2020 Frost Fighter IDH1000QR
Powered by Kubota Diesel
Diesel Fired
Hours: 7,463
IDF Heater (Indirect Fired Heater)
1,000,000 BTU
Air output volume: 4,800 Cubic Ft per minute
Up to 30 Hours or runtime on a single fuel fill
4x 11” Outlets
Self-Contained and fully enclosed
Pintle Hitch
Unit is serviced and ready to go to work!
2019 Vermeer BC1500 Wood Chipper 2019 Vermeer BC1500 Powered by 5.7L PSI Gas Motor -165hp Hour Meter reads: 1,495 Hours 15” Chipping Capacity Smartfeed System Rear Winch Drum Chipper 2” Hitch (Can be swapped to a pintle hitch for additional charge) Good Tires New Belt Machine was Serviced and Greased!
Powered by: Honda Gas Engine
33′ 6” Platform Height / 40′ Work Height / 20’ Horizontal Reach
Hydraulic Outriggers/Stabilizers
2WD Traction Drive Assist!
Electric Power, Air and Water to the Platform
Working Width: 11’ 8”
Basket Width: 3’ 7”
Minimum Weight: 3,306lbs
Overall Dimensions: (LxWxH) 14’9″x4’11″x6′3″
*1yr Factory Warranty (Parts & Labor) & 5yr Structural Warranty — Optional 2yr, 3yr & 4yr Warranties Available*
SEE ATTACHED SPEC SHEET IN PHOTOS!
NOT THE MODEL/CONFIGURATION YOU ARE LOOKING FOR?! WE CAN ORDER ANY MODEL YOU’D LIKE INQUIRE FOR MORE INFORMATION!
Powered by: DC Electric Motor (Batteries)
33′ 6” Platform Height / 40′ Work Height / 20’ Horizontal Reach
Hydraulic Outriggers/Stabilizers
2WD Traction Drive Assist!
Electric Power, Air and Water to the Platform
Working Width: 11’ 8”
Basket Width: 3’ 7”
Minimum Weight: 3,306lbs
Overall Dimensions: (LxWxH) 14’9″x4’11″x6′3″
*1yr Factory Warranty (Parts & Labor) & 5yr Structural Warranty — Optional 2yr, 3yr & 4yr Warranties Available*
SEE ATTACHED SPEC SHEET IN PHOTOS!
NOT THE MODEL/CONFIGURATION YOU ARE LOOKING FOR?! WE CAN ORDER ANY MODEL YOU’D LIKE INQUIRE FOR MORE INFORMATION!
2024 Genie AWP-30S Electric Vertical Mast Man Lift
2024 Genie AWP-30S
110V (Plug in)
Hour Meter reads: N/A
Platform Height: 29’6”
Working Height: 35” 6”
4x Outriggers
Outrigger Footprint (LxW): 6’4”x5’8”
Platform Dimensions (Standard) (LxW): 27”x26”
Platform Rated Capacity: 350lbs
Machine Weight: 798lbs
4x Solid Non-Marking Roller Wheels for easy moving!
Power to Platform
Dimensions stowed: 4’5” x 2’ 5”x 6’ 6”
Minor Cosmetic Blemishes from Transport (See Photos)
2022 Genie IWP-20S Electric Vertical Mast Man Lift
2022 Genie IWP-20S
12v DC Electric/110v
Platform Height: 20’3”
Working Height: 26” 3”
Platform Dimensions (Standard) (LxW): 27”x26”
Platform Rated Capacity: 350lbs
Machine Weight: 1,340lbs
4x Solid Non-Marking Roller Wheels for easy moving!
Onboard Charger
Power to Platform
Dimensions stowed: 5’ x 2’ 8”x 6’ 4”
2024 Genie GR-12 Electric Vertical Mast Man Lift
2024 Genie GR-12
24V Electric Powered
Hour Meter reads: .8 Hours
Platform Height: 11’4”
Working Height: 17” 4”
Platform Dimensions (Standard/retracted) (LxW): 35”x29.5”
Platform Dimensions (Standard-Extended) (LxW):: 55”x29.5”
Platform Rated Capacity: 500lbs
Platform Extension Deck Rated Capacity: 500lbs
Gradeability: 30%
Machine Weight: 1,652lbs
Solid Non-Marking Wheels
Onboard Charger
Power to Platform
Dimensions stowed: 4’ 5” x 2’ 6”x 5’ 10”
Minor Cosmetic Blemishes from Transport (See Photos)
2014 MAC 800G Indirect Fired Mobile Construction Heater
2014 MAC 800G
Powered by Isuzu Diesel
Diesel Fired
Hours: 8,167
IDF Heater (Indirect Fired Heater)
800,000 BTU
Air output volume: 3,900 Cubic Ft per minute
Up to 32.8 Hours or runtime on a single fuel fill
2x 11” Outlet
2x Ducting Included
Self-Contained and fully enclosed
2” Hitch
Unit is serviced and ready to go to work!
Recent Comments