2017 Ford F550XL 4×4 Altec Material Handler Bucket Truck
2017 Freightliner M2 106 Altec Material Handler Bucket Truck
2017 Freightliner M2 106
6.7L Cummins Turbo Diesel
Allison Automatic Transmission
Odometer reads: 67,956 Miles
4×2
Exhaust Brake
WB: 190”
GVWR: 33,000lbs
Air Brakes
Trailer Air Hook Up
Pintle Hitch
Bench Seat
A/C + Heat
AM/FM Radio
Total Bed Length: 16′ (14′ Utility Bed + 2′ Rear Deck Space)_
Strobe Lights
Good Tires all around!
Equipped with the following:
Altec AA55 Boom
56’ Platform Height / 61’ Working Height
-Rear Mounted Boom
Two Man Bucket
-Rated for 700lbs
Material Handling System
-Rated for 2,000lbs
Hydraulic Platform Tilt
Hydraulic Platform Rotation
Hydraulic Tool outlets at bucket_
Boom is insulated for 46kv
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at All Upper and Lower Control Station
Altec Boom was ANSI/Dielectrically Tested!
Truck was Serviced, Greased, and Vehicle Inspected!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2017+ INQUIRE FOR MORE DETAILS!
2019 International 7600 Dump Truck
2019 International 7600
International Nav N13 Turbo Diesel
-430hp
Odometer reads: 53,268 Miles
Allison Automatic Transmission
4×2
GVWR: 44,000lbs
Air Brakes
Trailer Air Brakes
Pintle Hitch
3 Stage Engine Brake
Locking Diff
WB:171”
A/C + Heat
AM/FM Radio
Driver/Passenger Air Ride Seat
Henderson Stainless 10’ Dump Box
Power Tarp
-One Asphalt Shoot in Tailgate
Good tires all around!
Truck was Serviced, Greased and Vehicle Inspected!
2018 Freightliner M2 106 Altec Digger Derrick Truck
2018 Freightliner M2 106
6.7L Cummins Turbo Diesel
Odometer reads: 76,836 Miles
Allison Automatic Transmission
4×2
-Exhaust Brake
WB: 190”
GVWR: 33,000lbs
Air Brakes
Trailer Air Hook Up
Pintle Hitch
Bench Seat
A/C and Heat
AM/FM Radio
Front 20k Bumper Winch
Bed Length: 11′
Utility Storage Bed Compartments
Rear Bumper Hydraulic Tool Outlet/Reel
Good Tires all around
Equipped with the following:
Altec DC47TR Digger Derrick Unit
-Sheave Height: 47’
-Max Lifting Capacity: 23,790lbs
-3 Sheaves
-Ride on Operating Station
-Rear Winch
-Hydraulic Auger Motor w/ 18” Auger Bit
-Pole Grabs
-4 Outriggers
-Insulated and rated for 46kv
Altec Boom was ANSI/Dielectrically Tested!
Truck was Serviced, Greased, and Vehicle Inspected!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2015+ INQUIRE FOR MORE DETAILS!
CHECK OUT OUR FULL WALK AROUND AND OPERATION VIDEO OF THIS TRUCK BELOW
2013 Altec DC1317 13” Diesel Wood Chipper
2013 Altec DC1317
Powered by Kubota Turbo Diesel
-85hp
Hour Meter reads: 59.3
13” Chipping Capacity
Disc Chipper
Good Blades
Pintle Hitch
Good Tires
Machine was Serviced and Greased!
2026 PJ Standard Steel Flatbed GB-02845842 Long bed
Available Lengths – 84”, 8’6”, 9’4”, 11’4”Headache Rack – Steel TubeLighting – 6” Glow Oval LEDDeck – 1/8” Steel Tread PlateFrame Rails – 4” Structural Channel SteelCrossmembers – 3” Steel Channel StelRear Skirt – Solid one piece with tapered corners for turning radius with recessed stepsGN Hitch – 30k lbs. B&W gooseneck hitch with welded ballRear Receiver – 24k lbs. B&W 2.5” receiverFuel Fill – Angled12v Trailer Plug – Round 7 pin RV style in GN well, 7 pin / 4 way combo on rearLight Box – SteelMarker Lighting – Bullet LEDRear Lighting – 6” Oval LEDSide Rails – 3/8” x2” side rails with stake pockets
Not sure which truck bed is right for you? Give us a call at 603.417.2112
Installation available!
2026 PJ Standard Steel Flatbed GB-03976034SD Cab & Chassis
Available Lengths – 84”, 8’6”, 9’4”, 11’4”Headache Rack – Steel TubeLighting – 6” Glow Oval LEDDeck – 1/8” Steel Tread PlateFrame Rails – 4” Structural Channel SteelCrossmembers – 3” Steel Channel StelRear Skirt – Solid one piece with tapered corners for turning radius with recessed stepsGN Hitch – 30k lbs. B&W gooseneck hitch with welded ballRear Receiver – 24k lbs. B&W 2.5” receiverFuel Fill – Angled12v Trailer Plug – Round 7 pin RV style in GN well, 7 pin / 4 way combo on rearLight Box – SteelMarker Lighting – Bullet LEDRear Lighting – 6” Oval LEDSide Rails – 3/8” x 2” side rails with stake pockets
Not sure which truck bed is right for you? Give us a call at 603.417.2112
Installation available!
2026 PJ Standard Steel Flatbed GB-02975842 Dually Long bed
Available Lengths – 84”, 8’6”, 9’4”, 11’4”Headache Rack – Steel TubeLighting – 6” Glow Oval LEDDeck – 1/8” Steel Tread PlateFrame Rails – 4” Structural Channel SteelCrossmembers – 3” Steel Channel StelRear Skirt – Solid one piece with tapered corners for turning radius with recessed stepsGN Hitch – 30k lbs. B&W gooseneck hitch with welded ballRear Receiver – 24k lbs. B&W 2.5” receiverFuel Fill – Angled12v Trailer Plug – Round 7 pin RV style in GN well, 7 pin / 4 way combo on rearLight Box – SteelMarker Lighting – Bullet LEDRear Lighting – 6” Oval LEDSide Rails – 3/8” x 2” side rails with stake pockets
Not sure which truck bed is right for you? Give us a call at 603.417.2112
Installation available!
2026 PJ Standard Steel Flatbed GB-01843842 Short Bed
Available Lengths – 84”, 8’6”, 9’4”, 11’4”Headache Rack – Steel TubeLighting – 6” Glow Oval LEDDeck – 1/8” Steel Tread PlateFrame Rails – 4” Structural Channel SteelCrossmembers – 3” Steel Channel StelRear Skirt – Solid one piece with tapered corners for turning radius with recessed stepsGN Hitch – 30k lbs. B&W gooseneck hitch with welded ballRear Receiver – 24k lbs. B&W 2.5” receiverFuel Fill – Angled12v Trailer Plug – Round 7 pin RV style in GN well, 7 pin / 4 way combo on rearLight Box – SteelMarker Lighting – Bullet LEDRear Lighting – 6” Oval LEDSide Rails – 3/8” x 2” side rails with stake pockets
Not sure which truck bed is right for you? Give us a call at 603.417.2112
Installation available!
2026 PJ Tradesman Hauler Bed GT-02975742DLX Long bed Dually
Available Lengths – 84”, 8’6”, 9’4”, 11’4”Headache Rack – Steel TubeLighting – 6” Glow Oval LEDDeck – 1/8” Steel Tread PlateFrame Rails – 4” Structural Channel SteelCrossmembers – 3” Steel Channel StelRear Skirt – Solid one piece with tapered corners for turning radius with recessed stepsGN Hitch – 30k lbs. B&W gooseneck hitch with welded ballRear Receiver – 24k lbs. B&W 2.5” receiverFuel Fill – Angled12v Trailer Plug – Round 7 pin RV style in GN well, 7 pin / 4 way combo on rearLight Box – SteelMarker Lighting – Bullet LEDRear Lighting – 6” Oval LEDToolbox – 2 Large front utility boxes, 2 low-profile rear toolboxes, 2 3/4 length shovel boxesFenders – SteelTie Downs – 18” Airline track tie-downs with 4 attachment ringsSide Steps – In front and rear of fenders
Not sure which truck bed is right for you? Give us a call at 603.417.2112
Installation available!
Recent Comments