One pump per hose loop means delivery of maximum Btu’s per hour.
Engineered for reliable performance and trouble-free starts
up to 140 hours of run time
the E3000 will provide maximum flow and ensure consistent heat delivery for thawing and curing applications.
The E3000 thaws or cures up to 6,000 sq. ft. With accessories this heater will cure up to 18,000 sq. ft. or provide 535,000 cu. ft. of dry heat at 83% efficiency, the highest in the industry.
With 3,000 ft. of hose and a hydraulic hose system, the E3000 allows for single person set-up and placement, for greater flexibility on all applications.
Positive displacement pump provides maximum flow and consistent heat delivery for thawing and curing.
Digital temperature controller with push button adjustment allows operators to easily adjust Heat Transfer Fluid (HTF) output temperature for all concrete curing applications.
Unit is fully functional and has just been serviced!
One pump per hose loop means delivery of maximum Btu’s per hour.
Engineered for reliable performance and trouble-free starts
up to 140 hours of run time
the E3000 will provide maximum flow and ensure consistent heat delivery for thawing and curing applications.
The E3000 thaws or cures up to 6,000 sq. ft. With accessories this heater will cure up to 18,000 sq. ft. or provide 535,000 cu. ft. of dry heat at 83% efficiency, the highest in the industry.
With 3,000 ft. of hose and a hydraulic hose system, the E3000 allows for single person set-up and placement, for greater flexibility on all applications.
Positive displacement pump provides maximum flow and consistent heat delivery for thawing and curing.
Digital temperature controller with push button adjustment allows operators to easily adjust Heat Transfer Fluid (HTF) output temperature for all concrete curing applications.
Unit is fully functional and has just been serviced!
Stanley CS25 Hydraulic Pole Saw W/ Boom mounting Hardware + Hyd. Lines
Works as it should
Oregon Bar
Blades sharp
Hyd. Lines + Boom mounting kit included
2011 Ford F750 Under CDL Rear Mount Bucket Truck
2011 Ford f750
Cummins ISB 6.7 turbo diesel
Allison automatic transmission
45,769 miles
A/C and heat
AM/FM radio
Bench seat
Air brakes
25,999 GVWR
Air ride driver seat
Good tires all around
Brush guard over cab
Equipped with the following:
Versalift VST-52 boom
52’ platform height
57’ working height
Single man basket
-rated for 400lbs
Bucket hydraulic rotation
Bucket hydraulic tilt
Boom is insulated for 46kv
2 outriggers
Upper/ Lower controls
-lever lowers
-Pistol grip uppers
Emergency stop at basket
Boom was just ANSI/Dielectrically tested and passed for a whole new year!
Just Serviced and Greased!
CHECK OUT OUR FULL WALK AROUND AND OPERATION VIDEO OF THIS VEHICLE!
Bradco 509 Ride On Skid Steer Hydraulic Attachment
Bradco 509
Skid Steer Plate Attachment
Standard Flow Hydraulic Hook Up
Operating Weight: 1,425lbs
Digging depth: 9′ 8″
12″ Digging Bucket
Left side turn piston seal is weeping slightly
Works as it should
Recent Comments