2026 PJ ALUMINUM DELUXE SKIRTED FLATBED ALGB-02845842 LONG BED
- Available Lengths – 84”, 8’6”, 9’4”, 11’4”
- Headache Rack – Aluminum Tube
- Lighting – 6” Glow Oval LED
- Deck – Extruded Aluminum
- Frame Rails – 4” Structural Channel Steel
- Crossmembers – 3” Aluminum Extruded Channel
- Rear Skirt– Solid one piece with tapered corners for turning radius with recessed steps
- GN Hitch – 30k lbs. B&W gooseneck hitch with welded ball
- Rear Receiver – 24k lbs. B&W 2.5” receiver
- Fuel Fill – Angled
- 12v Trailer Plug – Round 7 pin RV style in GN well, 7 pin / 4 way combo on rear
- Light Box – Aluminum
- Marker Lighting – Bullet LED
- Toolbox – 4 Lockable Flush-Mounted Toolboxes with large front utility toolboxes
- Toolbox handles – Black T-handle Compression
- Fenders – Aluminum
- Rear Lighting – 6” Oval LED
- Side Steps – Front and rear behind Fenders
- Side Rails – 3/8”x2” Aluminum Extrusion with Aluminum Stake pockets
Not sure which truck bed is right for you? Give us a call at 603.417.2112
Installation available!
2026 Duramag Aluminum Flatbed TB081104-AL Truck Body 8′ SRW
- All Extruded 6005 T6 Alum Box Tube Construction
- Long Sills to Compensate for Hump in Truck Frame
- G-Tube Perimeter Frame
- Extruded Aluminum Headboard w/Accessory Track
- OEM Plug & Play Wire Harness – Body End
- Cast Aluminum Fuel Fill Dish – Streetside Fronts
- 12″ Diamond Plate Apron
- 2×3.188 Long Sills
- 1.5″ x 3.125 Cross Members, 16″ OC
- T&G Extruded Alum Flooring
- All Pre-Wired w/LED Lights Inside Box Tube
- Stake Pockets & Rub Rail
- Lighted Headboard
*SUBFRAME SOLD SEPARATELY
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2016 Genie GS-2632 Electric Scissor Lift
2016 Genie GS-2632
Electric Powered (24v)
Hour Meter reads: 371.5
Platform Height: 26’1”
Working Height: 32’ 1”
Platform Rated Capacity: 500lbs
Machine Weight: 4,500lbs
Solid Non-Marking Wheels
Slide out Deck extension
Onboard Charger
Power to Platform
Dimensions: 8’x2’ 6”x 7’ 4” (With rails up) (6’4” with rails down)
Operates as it should
2026 DownEaster SwapHogg Bolt on Chipper Top CT1294
- Used for 12′ 13 yd container DESH1250 SDT-S (Container sold separately)
- Bolt together multi sections
- Mesh vents on both sides
- 24” height
- Built in ladder rack
- PPG cured paint w/ corrosion resistant epoxy prime
Powered by: DC Electric Motor (24V Batteries)
40′ Platform Height / 46’6” Work Height / 33’ Horizontal Reach
Hydraulic Outriggers/Stabilizers
Electric Power to the Platform
Working Width: 13’ 3”
Basket Width: 4′
Minimum Weight: 4,500lbs
Overall Dimensions: (LxWxH) 22’11″x5’6″x7’
*1yr Factory Warranty (Parts & Labor) & 5yr Structural Warranty — Optional 2yr, 3yr & 4yr Warranties Available*
SEE ATTACHED SPEC SHEET IN PHOTOS!
NOT THE MODEL/CONFIGURATION YOU ARE LOOKING FOR?! WE CAN ORDER ANY MODEL YOU’D LIKE INQUIRE FOR MORE INFORMATION!
Powered by: DC Electric Motor (48v Batteries)
65′ Platform Height / 71’ Work Height / 62’ Horizontal Reach
4×2
Electric Power to the Platform
Non-Marking tires
30% Gradeability
150° Jib Boom
170° Rotating Basket
Transport Length: 23’ 7”
Basket Width: 7’ 10”
Basket Working load: 620lbs
Minimum Weight: 22,000lbs
Overall Dimensions: (LxWxH) 29’10″x8’2″x8′10″
*1yr Factory Warranty (Parts & Labor) & 5yr Structural Warranty — Optional 2yr, 3yr & 4yr Warranties Available*
SEE ATTACHED SPEC SHEET IN PHOTOS!
NOT THE MODEL/CONFIGURATION YOU ARE LOOKING FOR?! WE CAN ORDER ANY MODEL YOU’D LIKE INQUIRE FOR MORE INFORMATION!
2017 Ford F750 Extended Cab Under CDL Chipper Dump Truck
2017 Ford F750
Triton V10 Gas Motor
Odometer Reads: 58,501 Miles
Automatic Transmission
4×2
WB: 197”
GVWR: 25,999
Extended Cab
A/C + Heat
AM/FM Radio
Bench Seat (Front and Rear)
Hydraulic Brakes
Pintle Hitch
15’ Dump Bed
Utility Storage Boxes
New Brake Rotors and Pads around the entire truck!
Good tires all around!
Truck was Serviced, Greased, and Vehicle Inspected!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2017+ INQUIRE FOR MORE DETAILS!
2018 Ford F650 Extended Cab Under CDL Chipper Dump Truck
2018 Ford F650
Triton V10 Gas Motor
Odometer Reads: 53,308 Miles
Automatic Transmission
4×2
WB: 203”
GVWR: 26,000
Extended Cab
Heat
AM/FM Radio
Bench Seat (Front and Rear)
Hydraulic Brakes
Pintle Hitch
15’ Dump Bed (13′ Bed + 2′ Top Shelf)
Utility Storage Boxes
New Brake Rotors and Pads around the entire truck!
Good tires all around!
Truck was Serviced, Greased, and Vehicle Inspected!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2017+ INQUIRE FOR MORE DETAILS!
2017 Freightliner M2 106 Altec Material Handler Bucket Truck
2017 Freightliner M2 106
Cummins 6.7L Turbo Diesel
Allison Automatic Transmission
Odometer Reads: 48,425
4×2
Exhaust Brake
WB: 190”
GVWR: 33,000lbs
Air Brakes
Trailer Air Supply
Pintle Hitch
Driver Seat + Passenger Bench Seat
A/C + Heat
AM/FM Radio
Total Bed Length: 16′ (14′ Utility Bed + 2′ Rear Deck Space)_
Strobe Lights
Good Tires all around!
Equipped with the following:
Altec AA55 Boom
56’ Platform Height / 61’ Working Height
-Rear Mounted Boom
Two Man Bucket
-Rated for 700lbs
Hydraulic Tool Circuit at platform
Material Handling System
-Rated for 2,000lbs
Boom is insulated for 46kv
Hydraulic Platform Rotation/Tilt
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at All Upper and Lower Control Station
Altec Boom will be ANSI/Dielectrically tested before sold!
Truck will be Serviced, Greased and Vehicle Inspected before sold!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2017+ INQUIRE FOR MORE DETAILS!
2018 Freightliner M2 106 Altec Material Handler Bucket Truck
2018 Freightliner M2 106
Cummins 6.7L Turbo Diesel
Allison Automatic Transmission
Odometer Reads: 83,613
4×2
Exhaust Brake
WB: 190”
GVWR: 33,000lbs
Air Brakes
Trailer Air Supply
Pintle Hitch
Driver Seat + Passenger Bench Seat
A/C + Heat
AM/FM Radio
Total Bed Length: 16′ (14′ Utility Bed + 2′ Rear Deck Space)_
Strobe Lights
Good Tires all around!
Equipped with the following:
Altec AA55 Boom
56’ Platform Height / 61’ Working Height
-Rear Mounted Boom
Two Man Bucket
-Rated for 700lbs
Hydraulic Tool Circuit at platform
Material Handling System
-Rated for 2,000lbs
Boom is insulated for 46kv
Hydraulic Platform Rotation/Tilt
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at All Upper and Lower Control Station
Altec Boom will be ANSI/Dielectrically tested before sold!
Truck will be Serviced, Greased and Vehicle Inspected before sold!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2015+ INQUIRE FOR MORE DETAILS!
Recent Comments