2016 Morbark Boxer 950HD
Powered by Isuzu Diesel
-48Hp
Hour meter reads: 401.7
Operating Capacity: 957lbs
Tip Capacity: 2,734lbs
Hinge Pin Height: 95.5” (7’9”)
Dump Height: 77.25” (6’4”)
Weight: 3,470lbs
Width of Machine (widest point w/o bucket): 44.5″
Aux Hydraulics
Ride On Platform
New 42″ GP Bucket
Decent Tracks
Will be sold serviced and greased!
READY TO WORK!
2021 Vermeer BC1800XL Wood Chipper
2021 Vermeer BC1800XL
Powered by John Deere Turbo Diesel
-173hp
Hour Meter reads: 3,589 Hours
18” Chipping Capacity
Good Blades
Rear Winch
Remote Control Included
Drum Chipper
Turn top Chute
Pintle Hitch
Good Tires
New Belt
Machine was Serviced and Greased!
2011 Heat King HK300
Mitsubishi Diesel Engine Powered/Genset
Hour Meter Reads: 5,614
273k BTU Heater
Hose: 4x 700’ Field Hoses
THAW frozen ground up to 5,600 FT2
CURE concrete up to 11,200 FT2
Temporary Heat up to 12,000 FT2
Field Pump: 1HP Centrifugal
Circulating Pump: 1/2hp Centrrifugal
Fuel Tank: 192 Gallon
Run Time: Up to 120 Hours
Flo Indicator: Ensures Proper Operation
Glycol Tank: 96 Gallons
Electrical Requirement: 2 – 120V AC 20A Circuits (Genset)
Axle: 7,000lb Torsion Axle / Electric Brakes
Hitch: Pintle
Overrall Length: 13’
Overall Width: 80”
Overall Height: 80”
Weight (Fuel Empty/Full): 4,700/6,080
Unit will be sold Serviced, Greased and Work Ready!
2012 PSW IDF700 Indirect Fired Mobile Construction Heater
2012 PSW IDF700
Powered by Kubota Diesel
Diesel Fired
Hours: 3,768
IDF Heater (Indirect Fired Heater)
700,000 BTU
1x 23” Outlet
Self-Contained
Pintle Hitch
Unit is serviced and ready to go to work!
2019 Hyundai 25B-9U Electric Forklift
2019 Hyundai 25B-9U
Powered by 48V Battery System
Hour meter reads: xxxx
4,700lb Lifting Capacity
3 Stage Mast
185” max lifting height
41” Forks
Power Side Shift Mast
Solid Rubber Tires
Unit Weight: 9,590lbs
Greased
Runs and Operates! Does not include charger
2021 Vermeer BC1000XL 12″ Wood Chipper
2015 Vermeer BC1000XL
Powered by PSI 3.0l Gas Motor
-89HP
Hour meter reads: 658 Hours
12” Chipping Capacity!
Drum Chipper
Pintle Hitch
Good Tires!
Machine was Serviced and Greased!
2019 Frost Fighter IDH1000QR Indirect Fired Mobile Construction Heater
2019 Frost Fighter IDH1000QR
Powered by Kubota Diesel
Diesel Fired
Hours: 4,253
IDF Heater (Indirect Fired Heater)
1,000,000 BTU
Air output volume: 4,800 Cubic Ft per minute
Up to 30 Hours or runtime on a single fuel fill
2x 20” Outlets
2x Ducting Included
Self-Contained and fully enclosed
Pintle Hitch
Unit is serviced and ready to go to work!
2019 Frost Fighter IDH1000QR Indirect Fired Mobile Construction Heater
2019 Frost Fighter IDH1000QR
Powered by Kubota Diesel
Diesel Fired
Hours: 7,601
IDF Heater (Indirect Fired Heater)
1,000,000 BTU
Air output volume: 4,800 Cubic Ft per minute
Up to 30 Hours or runtime on a single fuel fill
2x 20” Outlets
2x Ducting Included
Self-Contained and fully enclosed
Pintle Hitch
Unit is serviced and ready to go to work!
2019 Frost Fighter IDH1000QR Indirect Fired Mobile Construction Heater
2019 Frost Fighter IDH1000QR
Powered by Kubota Diesel
Diesel Fired
Hours: 8,301
IDF Heater (Indirect Fired Heater)
1,000,000 BTU
Air output volume: 4,800 Cubic Ft per minute
Up to 30 Hours or runtime on a single fuel fill
2x 20” Outlets
2x Ducting Included
Self-Contained and fully enclosed
Pintle Hitch
Unit is serviced and ready to go to work!
2015 Greenthaw Dryair 300GTS Ground Heater w/ Generator
2015 Greenthaw Dryair 300GTS
Hours: 6,653
Pintle Hitch
301k BTU Heater
Fuel: Diesel Fuel/ #1 or #2 Heating Oil
Burner: Single stage
Input capacity: 301,000 BTU
Output max capacity: 228,000 BTU
Fuel Consumption (100% run time) 2.15 GPH
Maximum thawing capacity: 6,000 sq. ft
Maximum Curing Area: 12,040 sq. ft
Operating temp: 195 degrees Fahrenheit
Heating capacity – area: 433,154 cu. ft
Heat transfer fluid: nontoxic propylene glycol
Operating pressure: 35 PSI
Flow: 965 GPH
Power Hose Reel
Onboard Hose max: 3,000′
Fuel Capacity: 150 gallons
Onboard 6.5KW Diesel gl7000 Kubota Generator
-Fully Enclosed
-Powers machine to make it useable on any jobsite
-Phase: Single
-120/240
No need to bring the Greenthaw into a heated shop before it goes out on jobsite! The preheater allows the unit to start and run-in sub-40-degree conditions!
Unit is fully functional and ready to go to work!
Recent Comments