2019 International 4300 Altec Material Handler Bucket Truck
2019 International 4300
Cummins 6.7L Turbo Diesel
Allison Automatic Transmission
Odometer Reads: 147,621
PTO Hours: 2,911
4×2
WB: 197”
GVWR: 33,000lbs
Air Brakes
Trailer Air Supply
Pintle Hitch
Exhaust Brake
Locking Rear Diff
Air Ride Driver Seat + Passenger Bench Seat_
A/C + Heat
AM/FM Radio
Reverse Camera_
Total Bed Length: 16′ (14′ Utility Bed + 2′ Rear Deck Space)_
Strobe Lights
Good Tires all around!
Equipped with the following:
Altec AA55E-OC Boom
56’ Platform Height / 61’ Working Height
-Rear Mounted Boom
Single Man Bucket
-Rated for 400lbs
Hydraulic Tool Circuit at platform
Material Handling System
-Rated for 2,000lbs
Boom is insulated for 46kv
Hydraulic Platform Rotation/Tilt
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at All Upper and Lower Control Station
Altec Boom will be ANSI/Dielectrically tested before sold!
Truck will be Serviced, Greased and Vehicle Inspected before sold!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2015+ INQUIRE FOR MORE DETAILS!
2019 Freightliner M2 106 Altec Material Handler Bucket Truck
2019 Freightliner M2 106
Cummins 6.7L Turbo Diesel
Allison Automatic Transmission
Odometer Reads: 89,433
4×2
WB: 190”
GVWR: 33,000lbs
Air Brakes
Trailer Air Supply
Pintle Hitch
Exhaust Brake
Bench Seat
A/C + Heat
AM/FM Radio
Total Bed Length: 16′ (14′ Utility Bed + 2′ Rear Deck Space)_
Strobe Lights
Good Tires all around!
Equipped with the following:
Altec AA55 Boom
56’ Platform Height / 61’ Working Height
-Rear Mounted Boom
Two Man Bucket
-Rated for 700lbs
Hydraulic Tool Circuit at platform
Material Handling System
-Rated for 2,000lbs
Boom is insulated for 46kv
Hydraulic Platform Rotation/Tilt
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at All Upper and Lower Control Station
Altec Boom will be ANSI/Dielectrically tested before sold!
Truck will be Serviced, Greased and Vehicle Inspected before sold!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2015+ INQUIRE FOR MORE DETAILS!
2016 Genie Z-62/40 4×4 Boom Man Lift
2016 Genie Z-62/40
Ford MSG Dual Fuel Motor Gas/LPG Motor
-LP Tank included
Hour meter reads: 2,742 hours
4×4
62’ Platform Height / 68’ Working Height
40’9” Horizontal Reach
25’7” Up and Over Clearance Max
5’ Jib
8’ Man Basket
Basket Rated Weight: 500lbs
Rated Gradeability: 45%
Onboard Generator (Power to the Platform)
355/55D625 foam Filled Tires
Good tires all around!
Operating Weight: 23,259lbs
Unit was Greased and Serviced!
2024 NIFTYLIFT SD50D 4×4 56’ MAN BOOM LIFT
This was a Demo Unit! It will come with a one year warranty!
2024 NIFTYLIFT SD50D
Powered by: Kubota Diesel
Hours: 60.1
49′ 6” Platform Height / 56’ Work Height / 28’ 6” Horizontal Reach
Hydraulic Outriggers/Stabilizers
4×4
Width: 5’ 3”
Working Width: 14’ 5”
Basket Width: 3’ 7”
Minimum Weight: 5,950lbs
SEE ATTACHED SPEC SHEET IN PHOTOS!
NOT THE MODEL/CONFIGURATION YOU ARE LOOKING FOR?! WE CAN ORDER ANY MODEL YOU’D LIKE INQUIRE FOR MORE INFORMATION!
Powered by: (Hybrid) Kubota Diesel Engine & DC Electric Motor w/ Batteries
85′6″ Platform Height / 92′ Work Height / 62’ Horizontal Reach
4×4
Electric Power to the Platform
Non-Marking tires
40% Gradeability
150° Jib Boom
180° Rotating Basket
Transport Length: 23’ 11”
Basket Width: 7’ 10”
Basket Working load: 620lbs
Minimum Weight: 31,880lbs
Overall Dimensions: (LxWxH) 30’5″x8’2″x8′10″
*1yr Factory Warranty (Parts & Labor) & 5yr Structural Warranty — Optional 2yr, 3yr & 4yr Warranties Available*
SEE ATTACHED SPEC SHEET IN PHOTOS!
NOT THE MODEL/CONFIGURATION YOU ARE LOOKING FOR?! WE CAN ORDER ANY MODEL YOU’D LIKE INQUIRE FOR MORE INFORMATION!
Powered by: Kubota Diesel Engine
62′ Platform Height / 68’6” Work Height / 42’8″ Horizontal Reach
4×4
Electric Power to the Platform
Non-Marking tires
45% Gradeability
150° Jib Boom
160° Rotating Basket
Transport Length: 17’ 11”
Basket Width: 5’ 11”
Equipped with the Tough Cage Basket
Basket Working load: 550lbs
Minimum Weight: 14,790lbs
Overall Dimensions: (LxWxH) 22’x7’5″x7′2″
*1yr Factory Warranty (Parts & Labor) & 5yr Structural Warranty — Optional 2yr, 3yr & 4yr Warranties Available*
SEE ATTACHED SPEC SHEET IN PHOTOS!
NOT THE MODEL/CONFIGURATION YOU ARE LOOKING FOR?! WE CAN ORDER ANY MODEL YOU’D LIKE INQUIRE FOR MORE INFORMATION!
2024 NIFTYLIFT SD50D 4×4 56’ MAN BOOM LIFT
This was a Demo Unit! It will come with a one year warranty!
2024 NIFTYLIFT SD50D
Powered by: Kubota Diesel
Hours: 61.8
49′ 6” Platform Height / 56’ Work Height / 28’ 6” Horizontal Reach
Hydraulic Outriggers/Stabilizers
4×4
Width: 5’ 3”
Working Width: 14’ 5”
Basket Width: 3’ 7”
Minimum Weight: 5,950lbs
SEE ATTACHED SPEC SHEET IN PHOTOS!
NOT THE MODEL/CONFIGURATION YOU ARE LOOKING FOR?! WE CAN ORDER ANY MODEL YOU’D LIKE INQUIRE FOR MORE INFORMATION!
2020 Freightliner M2 106 Altec Material Handler Bucket Truck
2020 Freightliner M2 106
Cummins 6.7L Turbo Diesel
Allison Automatic Transmission
Odometer Reads: 72,515 Miles
4×2
WB: 190”
GVWR: 33,000lbs
Air Brakes
Trailer Air Hook Up
Pintle Hitch
Exhaust Brake
Locking Rear Diff
Bench Seat
A/C + Heat
AM/FM Radio
14′ Utility Service Bed w/ Storage Compartments
Strobe Lights
Good Tires all around!
Equipped with the following:
Altec AM55E Boom
56’ Platform Height / 61’ Working Height
-Rear Mounted Boom
Two Man Bucket
-Rated for 600lbs
Hydraulic Tool Circuit at platform
Material Handling System
-Rated for 2,000lbs
Boom is insulated for 46kv
Hydraulic Platform Rotation/Tilt
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at Upper and Lower Control Station
Altec boom was ANSI/Dielectrically tested!
Truck was Serviced, Greased and Vehicle Inspected!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2015+ INQUIRE FOR MORE DETAILS!
2017 Ford F550XL Altec Utility Bucket Truck
2017 Ford F550XL
6.7L Powerstroke Turbo Diesel
Automatic Transmission
Odometer reads: 80,779 Miles
4×2
A/C and Heat
AM/FM radio
Hydraulic Brakes
Bench Seat
18,000 GVWR
Pintle Hitch
9′ Utility Storage Box + 3′ Rear Bumper Platform
-w/ Material Storage Bins
Strobe Light
New Brake Pads and Rotors all around!
New Rear tires! Fronts like new!
Equipped with the following:
Altec AT40-G Boom
40’ Platform Height / 45’ Working Height
-Center Mounted Boom
Man a Half Bucket
-Rated for 400lbs
Hydraulic Platform Tilt
Hydraulic Platform Rotation
Hydraulic Tool outlets at bucket
Boom is insulated and rated for 46KV
Continuous Rotation
Upper and Lower Controls
-Lever Lowers
-Pistol Grip Uppers
Emergency Stop Valve at upper and lower controls
Altec boom was ANSI/Dielectrically tested!
Truck was Serviced, Greased and Vehicle Inspected!
2018 Morbark M12R 12” Wood Chipper
Recent Comments