2012 Dryair Greenthaw 600GTS Ground Heater w/ Generator

2012-DRYAIR-GREENTHAW-600GTS-GROUND-HEATER W/-GENERATOR-Concrete-Curing-Ground-Thawing-Excavation-Work

2012 Dryair Greenthaw 600GTS Ground Heater w/ Generator

2012 Dryair 600GTS

Genset Hour Meter Reads: 8,339 Hours

Diesel Fired

Pintle Receiver Hitch

Onboard 7KW Kubota Diesel Powered Whisper Watt Generator

-Fully Enclosed

-Powers machine to make it useable on any jobsite

-Phase: 1

-120/240

620k BTU Heater

Can Carry up to 4,000’ of Hose

-Power Reel (In and out)

THAW AREA – 6,000 ft² (std), 11,200 ft² (w/acc)

CURE AREA – 8,000 ft² (std), 25,000 ft² (w/acc)

The large 620,000 BTU heater provides you with ample BTU’s for ground thaw, concrete cure & space or fluid heating applications

Patented Flow Reverser  – Eliminates hot and cold zones in the thaw pattern

Reduces time & fuel costs by up to 50%

Consistent curing temperatures across the entire slab means the whole slab cures at the same rate

Patented Combustion Environment Control System preheats the fuel and air used for combustion

No need to bring it in to a heated shop before it goes out on the job.  The preheater allows the unit to start & run even in sub 40 degree conditions

Industry leading multi-loop ground thaw set-up for job site flexibility and optimum fluid circulation & heat transfer

Manifold System allows for fan coils or heat exchangers to plug in for space heating or fluid heating

Unit is fully functional and ready to go to work!

2011 Hyster E80Z EP Electric Forklift

2011-Hyster-E80Z-EP-Electric-Forklift-8K-Capacity-Warehouse-Forktruck-Hyster-Yale-Diesel-LPG

2011 Hyster E80Z EP Electric Forklift

2011 Hyster E80Z EP

Powered by 36V Battery System (Includes Charger)

Hour meter reads: 6,117

8,000lb lifting capacity

3 Stage Mast

195” max lifting height

48” Forks w/ 46“ Mast

Power Shift Mast + Power Shift Forks

Solid Rubber Tires

Unit Weight: 14,500lbs

Greased

Runs and Operates!

2013 Yale ERCO65VGN48TE083 Electric Forklift

2013-Yale-ERCO65VGN48TE083-Electric-Forklift-Warehouse-Forktruck-Cascade-Pallet-Forks

2013 Yale ERCO65VGN48TE083 Electric Forklift

2013 Yale ERCO65VGN48TE083

Powered by 48V Battery System (Charger NOT Included)

Hour meter reads: 13,738

6,000lb Lifting Capacity

3 Stage Mast

175“ Max Lifting Height

32” Forks

Cascade 28G-FDS-160 Double Pallet Extendable Mast (See info below)

42” Main Mast w/ 26” outside to outside of forks and 80” Outside to Outside of Mast when extended)

Power Shift Forks and Mast

Sold Rubber non marking tires

Unit Weight: 12,785lbs

Greased

Runs and Operates!

2014 Freightliner 114SD Hiab Knuckle Boom Crane Truck

2014-Freightliner-114SD-Hiab-Knuckle-Boom-Crane-Truck-Cormach-Palfinger-Knuckle Crane-Diesel-Automatic-18 Speed-Form Truck-Concrete-Crane

2014 Freightliner 114SD Hiab Knuckle Boom Crane Truck

2014 Freightliner 114SD

Detroit DD13 Turbo Diesel

-500hp

Odometer reads: 183,097 Miles

Total Engine Hours: 8,006

Eaton 10 Speed Transmission

Tandem Axle with Drop Tag Axle

GVWR: 66,000lbs

Axle Capacity Front: 20,000lbs

Axle Capacity Rear: 46,000lbs

Locking Rear Diff

Locking Interaxle Diff

Gear Ratio: 4.10

Engine Brake

WB: 288″

Air Brakes

Pintle Hitch

A/C and Heat

AM/FM Radio

Air Ride Driver Seat

Power Windows

Air Ride Cab

20’ Flatbed

Good Tires all around

Equipped with the following:

-Hiab 322E-5 Hi-Pro Knuckle Boom Crane

-72′ Vertical Reach

-64’5” Side Reach

-20,500lb Lifting Capacity (Minus Jib)

-1,490lbs at 64’5” side reach

-2x Outriggers

-Lever Lowers

-Wireless Remote Control

Hiab Crane was ANSI Boom Inspected!

Truck was Serviced, Greased, and DOT Inspected!

WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2017+ INQUIRE FOR MORE DETAILS!

2016 Altec DRM12 12” Wood Chipper

2016-Altec-DRM12-Diesel-12"-Wood-Chipper

2016 Altec DRM12 12″ Wood Chipper
2016 Altec DRM12 
Powered by Kubota Diesel Engine
-85HP
Hour meter reads: 1.7 Hours (Tach was just replaced Hours Unknown)
12” Chipping Capacity!
AutoFeed System (Ask and we can send you a video of it operating)
Drum Chipper
Hydraulic Crush/Opening Feeder 
Pintle Hitch
Good Tires!
New Oil Pan
Good Running machine that was just Serviced and Greased / Could use cosmetic restoration

2015 Kenworth T440 Hiab Knuckle Boom Crane Truck

2015-Kenworth-T440-Hiab-Palfinger-Cormach-Fassi-Knuclr-Crane-Boom-Truck-Flatbed-Hauler-Truck

2015 Kenworth T440 Hiab Knuckle Boom Crane Truck
2015 Kenworth T440
Paccar PX-9 Turbo Diesel
-370hp
Odometer reads: 138,100 Miles
Total Engine Hours: 8,929
Allison Automatic Transmission
Tandem Axle
GVWR: 66,000lbs
Axle Capacity Front: 20,000lbs
Axle Capacity Rear: 46,000lbs
Locking INTR Axle
Gear Ratio: 5.38
Engine Brake
WB: 276″
Air Brakes
Pintle Hitch
A/C and Heat
AM/FM Radio
Air Ride Driver Seat
Bench Passenger Seat
22’6″ Flatbed
Good Tires all around
Equipped with the following:
-Hiab 322E-5 Hi-Pro Knuckle Boom Crane
-72′ Vertical Reach
-64’5” Side Reach
-20,500lb Lifting Capacity (Minus Jib)
-1,490lbs at 64’5” side reach
-2x Outriggers
-Lever Lowers
-Wireless Remote Control
Hiab Crane was ANSI Inspected!
Truck was Serviced, Greased, and Vehicle Inspected!

2015 Ford F750 Terex Material Handler Bucket Truck

2015-Ford-F750-Terex-Material-Handler-Bucket-Truck-Auto-Line-Truck-Utility-Truck-Altec-MH

2015 Ford F750 Terex Material Handler Bucket Truck
2015 Ford F750
Cummins 6.7L Turbo Diesel
Allison Automatic Transmission
Odometer Reads: 92,660 Miles
PTO Hours: 3,026 Hours
4×2
WB: 194”
GVWR: 33,000lbs
Air Brakes
Trailer Air Brakes
Pintle Hitch
Diff Lock
Driver Air Ride Seat + Passenger Bench Seat
A/C + Heat
AM/FM Radio
Total Bed Length: 16’6″ (14′ Utility Bed w/ Storage Compartments + 2’6″ Rear Deck Space)
Strobe Lights
Good Tires all around!
Equipped with the following:
Terex Hi-Ranger 5TC-55
55’ Platform Height / 60’ Working Heigh
-Rear Mounted Boom
Two Man Bucket
-Rated for 700lbs
Hydraulic Tool Circuit at platform
Material Handling Jib System at Bucket
-Rated for 2,000lbs
Boom is insulated for 69kv
Hydraulic Platform Rotation/Tilt
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at All Upper and Lower Control Station
Terex Boom was ANSI/Dielectrically tested!
Truck was Serviced, Greased and DOT Inspected!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2017+ INQUIRE FOR MORE DETAILS!

2020 International MV607 Altec Material Handler Bucket Truck

2020-International-MV607-Altec-Material-Handler-Bucket-Truck-Utility-Boom-Lineman-Truck-Diesel-Auto-AC-Storm-Truck

2020 International MV607 Altec Material Handler Bucket Truck
2020 International MV607
Cummins 6.7L Turbo Diesel
Allison Automatic Transmission
Odometer Reads: 62,429 Miles
4×2
WB: 193”
GVWR: 33,000lbs
Air Brakes
Trailer Air Brakes
Pintle Hitch
Bench Seat
A/C + Heat
AM/FM Radio
14′ Utility Service Bed w/ Storage Compartments_
Strobe Lights
Good Tires all around!
Equipped with the following:
Altec AA55 Boom
56’ Platform Height / 61’ Working Height
-Rear Mounted Boom
Two Man Bucket
-Rated for 700lbs
Hydraulic Tool Circuit at platform
Material Handling System
-Rated for 2,000lbs
Boom is insulated for 46kv
Hydraulic Platform Rotation/Tilt
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at All Upper and Lower Control Station
Altec Boom was ANSI/Dielectrically tested!
Truck was Serviced, Greased and Vehicle Inspected!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2015+ INQUIRE FOR MORE DETAILS!

2014 Western Star 4700SB Fassi Knuckle Boom Crane Truck

2014-Western-Star-4700SB-Fassi-Knuckle-Crane-Crane-Boom-Flatbed-Truck-Utility-Form-Crane-Truck

2014 Western Star 4700SB Fassi Knuckle Boom Crane Truck
2014 Western Star 4700SB
Detroit DD13 12.8L Turbo Diesel
-500hp
Odometer reads: 55,654 Miles
Total Engine Hours: 8,413
Eaton 8LL Transmission
Tandem Axle w/ Tri Drop Axle
GVWR: 66,000lbs
Axle Capacity Front: 20,000lbs
Axle Capacity Rear: 46,000lbs
Locking INTR Axle
Rear Locking Diff
Rear Ratio: 4.10
Jake Brake
WB: 273″
Air Brakes
A/C and Heat
AM/FM Radio
Air Ride Driver Seat
Bench Passenger Seat
24’6″ Flatbed w/ Tiedowns
Good Tires all around
Equipped with the following:
-Fassi F385A.2.26 E-DYNAMIC Knuckle Boom Crane
-85′ Vertical Reach
-74’4” Side Reach
– 5,886lb Lifting Capacity
-1,466lbs at 74’4” side reach
-4x Outriggers
-Lever Lowers
-Wireless Remote Control
Fassi Crane was ANSI Inspected!
Truck was Serviced, Greased, and Vehicle Inspected!

2017 International 4300 Altec Material Handler Bucket Truck

2017-International-4300-Altec-Material-Handler-Utility-Lineman-Linemen-Diesel-Service-Boom-Bucket-Truck

2017 International 4300 Altec Material Handler Bucket Truck
2017 International 4300
Cummins 6.7L Turbo Diesel
Allison Automatic Transmission
Odometer Reads: 75,657 Miles
4×2
WB: 193”
GVWR: 33,000lbs
Locking Diff
Air Brakes
Pintle Hitch
Bench Seat
A/C + Heat
AM/FM Radio
14′ Utility Service Bed w/ Storage Compartments
Strobe Lights
Good Tires all around!
Equipped with the following:
Altec AA55 Boom
56’ Platform Height / 61’ Working Height
-Rear Mounted Boom
Two Man Bucket
-Rated for 700lbs
Hydraulic Tool Circuit at platform
Material Handling System
-Rated for 2,000lbs
Boom is insulated for 46kv
Hydraulic Platform Rotation/Tilt
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at All Upper and Lower Control Station
Altec Boom was ANSI/Dielectrically tested !
Truck was Serviced, Greased and Vehicle Inspected !
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2015+ INQUIRE FOR MORE DETAILS!