2020 Wacker Neuson E3000 Ground Heater w/ Generator
2020 Wacker Neuson E3000
Hours:1,083.2
Diesel Fired
385,000 BTU’s
2” Ball
Onboard 6Kw Kohler Diesel Generator
-Hours: 1,109.5
-Fully enclosed
-Powers machine to make it useable on any jobsite
Dual rear hose set up
One pump per hose loop means delivery of maximum Btu’s per hour.
Engineered for reliable performance and trouble-free starts
up to 140 hours of run time
the E3000 will provide maximum flow and ensure consistent heat delivery for thawing and curing applications.
The E3000 thaws or cures up to 6,000 sq. ft. With accessories this heater will cure up to 18,000 sq. ft. or provide 535,000 cu. ft. of dry heat at 83% efficiency, the highest in the industry.
With 3,000 ft. of hose and a hydraulic hose system, the E3000 allows for single person set-up and placement, for greater flexibility on all applications.
Positive displacement pump provides maximum flow and consistent heat delivery for thawing and curing.
Digital temperature controller with push button adjustment allows operators to easily adjust Heat Transfer Fluid (HTF) output temperature for all concrete curing applications.
Unit is fully functional and has just been serviced!
2020 Wacker Neuson E3000 Ground Heater w/ Generator
2020 Wacker Neuson E3000
Hours:730
Diesel Fired
385,000 BTU’s
2” Ball
Onboard 6Kw Kohler Diesel Generator
-Hours: 856.7
-Fully enclosed
-Powers machine to make it useable on any jobsite
Dual rear hose set up
One pump per hose loop means delivery of maximum Btu’s per hour.
Engineered for reliable performance and trouble-free starts
up to 140 hours of run time
the E3000 will provide maximum flow and ensure consistent heat delivery for thawing and curing applications.
The E3000 thaws or cures up to 6,000 sq. ft. With accessories this heater will cure up to 18,000 sq. ft. or provide 535,000 cu. ft. of dry heat at 83% efficiency, the highest in the industry.
With 3,000 ft. of hose and a hydraulic hose system, the E3000 allows for single person set-up and placement, for greater flexibility on all applications.
Positive displacement pump provides maximum flow and consistent heat delivery for thawing and curing.
Digital temperature controller with push button adjustment allows operators to easily adjust Heat Transfer Fluid (HTF) output temperature for all concrete curing applications.
Unit is fully functional and has just been serviced!
2010 Dryair Greenthaw 600GTS Ground Heater w/ Generator
2010 Dryair 600GTS
Hours: 2,218
Diesel Fired
Pintle Hitch
Onboard 7KW Kubota Diesel Powered Whisper Watt Generator
-Fully Enclosed
-Powers machine to make it useable on any jobsite
-Phase: 1
-120/240
620k BTU Heater
4,000’ of hose
-Power Reel (In and out)
THAW AREA – 6,000 ft² (std), 11,200 ft² (w/acc)
CURE AREA – 8,000 ft² (std), 25,000 ft² (w/acc)
The large 620,000 BTU heater provides you with ample BTU’s for ground thaw, concrete cure & space or fluid heating applications
Patented Flow Reverser – Eliminates hot and cold zones in the thaw pattern
Reduces time & fuel costs by up to 50%
Consistent curing temperatures across the entire slab means the whole slab cures at the same rate
Patented Combustion Environment Control System preheats the fuel and air used for combustion
No need to bring it in to a heated shop before it goes out on the job. The preheater allows the unit to start & run even in sub 40 degree conditions
Industry leading multi-loop ground thaw set-up for job site flexibility and optimum fluid circulation & heat transfer
Manifold System allows for fan coils or heat exchangers to plug in for space heating or fluid heating
Unit is fully functional and ready to go to work!
2005 Ground Heater E3000 Enclosed Ground Heater Construction Heater Concrete Curer
2005 Ground Heater E3000
Hours: 13,804
Diesel Fired
Dual rear hose set up
Engineered for reliable performance and trouble-free starts
up to 140 hours of run time
the E3000 will provide maximum flow and ensure consistent heat delivery for thawing and curing applications.
The E3000 thaws or cures up to 6,000 sq. ft. With accessories this heater will cure up to 18,000 sq. ft. or provide 535,000 cu. ft. of dry heat at 83% efficiency, the highest in the industry.
With 3,000 ft. of hose and a hydraulic hose system, the E3000 allows for single person set-up and placement, for greater flexibility on all applications.
Positive displacement pump provides maximum flow and consistent heat delivery for thawing and curing.
One pump per hose loop means delivery of maximum Btu’s per hour.
Digital temperature controller with push button adjustment allows operators to easily adjust Heat Transfer Fluid (HTF) output temperature for all concrete curing applications.
Performance monitoring strobe light indicates from a distance that all systems are operating properly.
Unit is fully functional and has just been fully serviced!
Ready to work!
Recent Comments