2020 Freightliner M2 106 Altec Material Handler Bucket Truck
2020 Freightliner M2 106
Cummins 6.7L Turbo Diesel
Allison Automatic Transmission
Odometer Reads: 72,074 Miles
4×2
WB: 190”
GVWR: 33,000lbs
Air Brakes
Trailer Air Hook Up
Pintle Hitch
Exhaust Brake_
Locking Rear Diff
Bench Seat
A/C + Heat
AM/FM Radio
14′ Utility Service Bed w/ Storage Compartments_
Strobe Lights
Good Tires all around!
Equipped with the following:
Altec AM55E Boom
56’ Platform Height / 61’ Working Height
-Rear Mounted Boom
Two Man Bucket
-Rated for 600lbs
Hydraulic Tool Circuit at platform
Material Handling System
-Rated for 2,000lbs
Boom is insulated for 46kv
Hydraulic Platform Rotation/Tilt
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at Upper and Lower Control Station
Altec boom will be ANSI/Dielectrically tested before sold!
Truck will be Serviced, Greased and Vehicle Inspected before sold!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2015+ INQUIRE FOR MORE DETAILS!
2017 Ford F550XL Altec Utility Bucket Truck
2017 Ford F550XL
6.7L Powerstroke Turbo Diesel
Automatic Transmission
Odometer reads: 80,749 Miles
4×2
A/C and Heat
AM/FM radio
Hydraulic Brakes
Bench Seat
18,000 GVWR
Pintle Hitch
9′ Utility Storage Box + 3′ 6″ Rear Bumper Platform_
-w/ Material Storage Bins
Strobe Light
Good tires all around!
Equipped with the following:
Altec AT40-G Boom
40’ Platform Height / 45’ Working Height
-Center Mounted Boom
Man a Half Bucket
-Rated for 400lbs
Hydraulic Platform Tilt
Hydraulic Platform Rotation
Hydraulic Tool outlets at bucket_
Boom is insulated and rated for 46KV
Continuous Rotation
Upper and Lower Controls
-Lever Lowers
-Pistol Grip Uppers
Emergency Stop Valve at upper and lower controls
Altec boom will be ANSI/Dielectrically tested before sold!
Truck will be Serviced, Greased and Vehicle Inspected before sold!
2016 Ford 550XL Utility Service Box Truck
2016 Ford 550XL
Powerstroke 6.7L Turbo Diesel
Miles: 77,336
Automatic Transmission
A/C and Heat
AM/FM radio
Reverse Camera
Power Windows and Locks
Bench Seat
Hydraulic Brakes
GVWR: 19,500
WB: 201”
Rear Hitch Receiver
Rear Bumper Vise
Good tires all around!
Equipped with the following:
17′ Dejana Van Utility Body
-8 Power Remote Locking External Toolboxes
-Rear Access Roll Up Door
Truck was Serviced, Greased and Vehicle Inspected!
SwapHogg 12′ Chipper Body DESH1250 SDT-S/CT1294
- 12′ Container with bolt on Chipper top
- Integrated ladder rack
- Vented Side walls
- Single door
- 3″ Structural channel
- cross members spaced 16″ on center
- Floor constructed with 10 GA steel
- Front, side, & gate panels
- constructed with 12 GA steel
- Doors constructed with 3″x 3″ tubing
- Rear posts constructed with 3/16″ steel
- Front & side top rails constructed with
- 3″x 3″ tubing
- PPG cured paint w/ corrosion resistant epoxy primer
- Steel ground rollers
- Compatible with SwapHogg and Switch & Go systems
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2025 Norstar Low Pro/Service Utility SD0868458 Truck Body
Adjustable Runners 4″ x 38″ – 42″
Standard 24″ OC Cross Members
Diam Plate Steel .125″ Flat Deck w/ GN Cap
Standard 3.5″ Tube x 37.75″ Head Rack
Steel Smooth Fenders
Front & Rear Paddle Latch Tool Boxes
Standard Adjustable Shelves
Tail Gate Fold Down w/ Latch
4 Recessed D-Rings 5000 lbs
2 5/16″ Raw Steel 1″ Raised 30k Ball
4/5/7 Way Plug Rear & 7 Way Plug in Gooseneck Well
Standard LED Light Package
2 Led Rear Working Lights w/ Alum Housing & 2.5″ Rec Hitch
Mud Flap Mounting Brackets L & R
Color: Black
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2025 Norstar Skirted Flatbed ST0868458 Truck Body
Adjustable Runners 4″ x 38″ – 42″
Standard 24″ OC Cross Members
Diam Plate Steel .125″ Flat Deck w/ GN Cap
Side Stake Pockets & Rub Rail
Standard 3.5″ Tube x 37.75″ Head Rack
Steel Smooth Fenders
Front & Rear Paddle Latch Tool Boxes
2 5/16″ Raw Steel 1″ Raised 30k Ball
4/5/7 Way Plug Rear & 7 Way Plug in Gooseneck Well
Standard LED Light Package
Mud Flap Mounting Brackets L & R
Color: Black
Not sure which truck bed is right for you? Give us a call at 603.417.2112
DOWNEASTER 9′ STEEL DUMP BODY DED09396
- 10 gauge construction throughout
- Dirt shedding , sloped design at side plate and tailgate top
- Double panel side plates equal over 1/4″ thickness.
- Full depth 3/16″rear corner pillars incorporate recessed lighting, keyhole banjo eyes and lower tailgate pin receiver.
- All lighting is LED rubber mounted and NTEA and Federal compliant.
- 2 1/2″ shorter deck height (9′ only)
- Mounting height of 9.5″ chassis to floor (9′ only)
- 10″ board extension pockets ease of install & future optional / custom overhang.
- Self aligning rear latch release for the top gate pins
- Integrated tarp hooks
- DuPont™ Imron® Elite black oven cured paint w/ epoxy primer
FLOOR & UNDERSTRUCTURE
- 4″ x 5.7# Channel long sills and 3″ channel cross members (9′)
- 6″ x 8.2# Channel long sills (10′, 10.5′ 11′)
- 3/16″ Stainless formed 7″ long sills (SS body)
- 3″ stainless tubing, interlaced cross members (SS body)
- Two piece 10 gauge floor with 45 degree slopped corners where meets seamless side plate.
- Greasable Bronze bearings for underbody release mechanisms
TAILGATE
- Formed 10 gauge inner, outer and end panels.
- 1″ hardened pins, (1″ Stainless) with plasma cut latch receiving lock fingers
- Adjustable 1/4″ chain for spreading aggregate material & holding gate in down position
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2025 DURAMAG S-SERIES ALUMINUM UTILITY BED LONG BED
- Standard Features
- All Aluminum Extruded Box Tube Construction
- Fully Welded Construction – No Bolts to Come Loose
- Extreme Duty .625″ Interlocking Extruded Flooring
- Heavy Slam Latch Tailgate
- Inner Bed Walls & Top of Compartments 3/16″ Smooth Sheet
- One Piece Sides
- Welded Fender Flares – Superior Strength & Rigidity
- Tread Plate Splash Guards on Front
- 40″ Compartment Height
- Radius Corner Traditional Swing Doors
- Blind Compression T-Handles
- Heavy Duty Hidden Hinges
- Adjustable Shelf Brackets in All Compartments (One Shelf Included in Each Compartment)
- Pass Through Panel Between Rear & Center Compartments
- LED Marker Lights, Installed
- LED Penny Lights for Compartments, Installed
- Ultra-Thin 5.5″ LED STT/BU Body Lights, Installed
- OEM Plug & Play Wire Harness, Body End Only (Adaptors Sold Separately)
- Powder Coated White, Black or Red
- Upfit Hardware Kit, Shipped Loose
- (1) Cast Aluminum Fuel Fill Dish, Installed (Street-side Front on Pickups / Street-side Rear on Cab Chassis)
Includes subframe and rear bumper. Additional options and features available.
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2025 DURAMAG S-SERIES ALUMINUM UTILITY BED
- Standard Features
- All Aluminum Extruded Box Tube Construction
- Fully Welded Construction – No Bolts to Come Loose
- Extreme Duty .625″ Interlocking Extruded Flooring
- Heavy Slam Latch Tailgate
- Inner Bed Walls & Top of Compartments 3/16″ Smooth Sheet
- One Piece Sides
- Welded Fender Flares – Superior Strength & Rigidity
- Tread Plate Splash Guards on Front
- 40″ Compartment Height
- Radius Corner Traditional Swing Doors
- Blind Compression T-Handles
- Heavy Duty Hidden Hinges
- Adjustable Shelf Brackets in All Compartments (One Shelf Included in Each Compartment)
- Pass Through Panel Between Rear & Center Compartments
- LED Marker Lights, Installed
- LED Penny Lights for Compartments, Installed
- Ultra-Thin 5.5″ LED STT/BU Body Lights, Installed
- OEM Plug & Play Wire Harness, Body End Only (Adaptors Sold Separately)
- Powder Coated White, Black or Red
- Upfit Hardware Kit, Shipped Loose
- (1) Cast Aluminum Fuel Fill Dish, Installed (Street-side Front on Pickups / Street-side Rear on Cab Chassis)
Includes subframe and rear bumper. Additional options and features available.
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2017 Ford F550XL Versalift Utility Bucket Truck
2017 Ford F550XL
6.7L Powerstroke Turbo Diesel
Automatic Transmission
Odometer reads: 105,803 Miles
PTO Hour Meter Reads: 1,193 Hours
4×2
WB: 169”
A/C and Heat
AM/FM radio
Hydraulic Brakes
Bench Seat
19,500 GVWR
9′ Utility Storage Box + 3′ 6″ Rear Bumper Platform_
-w/ Material Storage Bins
Ladder Rack
Strobe Light
Good Tires all around!
Equipped with the following:
Versalift SST37EIH-01 Boom
37’ Platform Height / 42’ Working Height / 27’ 9” Side Reach
-Center Mounted Boom
Man a Half Bucket
-Rated for 400lbs
Hydraulic Platform Tilt_
Hydraulic Platform Rotation_
Hydraulic Tool outlet at bucket
Boom is insulated and rated for 46KV
370 Non-continuous rotation
Upper and Lower Controls
-Lever Lowers
-Pistol Grip Uppers
Emergency Stop Valve at upper and lower controls
Versalift Boom will be ANSI/Dielectrically tested before sold!
Truck was Serviced, Greased and Vehicle Inspected!
Recent Comments