2015 Greenthaw Dryair 300GTS Ground Heater + Concrete Curer w/ Generator

2015-Greenthaw-Dryair-300GTS-Ground-Heater-Concrete-Curing-Heater-Towable-Jobsite-Machine

2015 Greenthaw Dryair 300GTS Ground Heater + Concrete Curer w/ Generator

2015 Greenthaw Dryair 300GTS

Hours: 4,807

Pintle Hitch

301k BTU Heater

Fuel: Diesel Fuel/ #1 or #2 Heating Oil

Burner: Single stage

Input capacity: 301,000 BTU

Output max capacity: 228,000 BTU

Fuel Consumption (100% run time) 2.15 GPH

Maximum thawing capacity: 6,000 sq. ft

Maximum Curing Area: 12,040 sq. ft

Operating temp: 195 degrees Fahrenheit

Heating capacity – area: 433,154 cu. ft

Heat transfer fluid: nontoxic propylene glycol

Operating pressure: 35 PSI

Flow: 965 GPH

Power Hose Reel

Onboard Hose max: 3,000′

Fuel Capacity: 150 gallons

Onboard 6.5KW Diesel gl7000 Kubota Generator

-Fully Enclosed

-Powers machine to make it useable on any jobsite

-Phase: Single

-120/240

No need to bring the Greenthaw in to a heated shop before it goes out on jobsite! The preheater allows the unit to start and run in sub 40 degree conditions!

Unit was just serviced and greased an ready to work!

2013 Macgill-Ross MAC6000 Ground Heater w/ Generator

2013-Macgill-Ross-MAC-MAC6000-Ground-Curing-Construction-Heating-Concrete-Curing-Ground-Heater-Generator

2013 Macgill-Ross MAC6000 Ground Heater w/ Generator

2013 Macgill-Ross MAC6000 Ground Heater

Hours: 3,922 Hours

Diesel Fired

635,000 BTU’s

Pintle Hitch

Onboard Isuzu Diesel Motor/Generator

-Fully enclosed

-Powers machine to make it useable on any jobsite

Up to 56 hours at 75% and 78 hours at 50% of run time

Up to 6,000 square feet (558 square meters) of coverage area

Flexible heat for any situation; the MAC6000 Hydronic Surface Heater

This unit is completely self-contained and mounted on a tandem axle trailer. It features 110% fluid containment and has six (6) 500 foot (153 meter) sections of ground hose for maximizing coverage options on every jobsite. The combustion chamber is 86% efficient and has an input of 630,000 BTU’s per hour (185 kW). The MAC6000 is comprised of rugged, heavy duty steel construction inside and out, with a powder coat exterior finish. This unit provides oversized access doors for service, maintenance, and operation. It also features user-friendly, PLC based push button controls for ease of use and accurate operation.

Engineered for reliable performance and trouble-free starts

Unit is fully functional and has just been serviced!