2015 Dryair Greenthaw 300GTS Ground Heater w/ Generator
2015 Greenthaw Dryair 300GTS
Hours: 2,849
Pintle Hitch
301k BTU Heater
Fuel: Diesel Fuel/ #1 or #2 Heating Oil
Burner: Single stage
Input capacity: 301,000 BTU
Output max capacity: 228,000 BTU
Fuel Consumption (100% run time) 2.15 GPH
Maximum thawing capacity: 6,000 sq. ft
Maximum Curing Area: 12,040 sq. ft
Operating temp: 195 degrees Fahrenheit
Heating capacity – area: 433,154 cu. ft
Heat transfer fluid: nontoxic propylene glycol
Operating pressure: 35 PSI
Flow: 965 GPH
Power Hose Reel
Onboard Hose max: 3,000′
Fuel Capacity: 150 gallons
Onboard 6.5KW Diesel gl7000 Kubota Generator
-Fully Enclosed
-Powers machine to make it useable on any jobsite
-Phase: Single
-120/240
No need to bring the Greenthaw in to a heated shop before it goes out on jobsite! The preheater allows the unit to start and run in sub 40 degree conditions!
Unit was just serviced and greased an ready to work!
2010 Dryair Greenthaw 600GTS Ground Heater w/ Generator
2010 Dryair 600GTS
Hours: 2,218
Diesel Fired
Pintle Hitch
Onboard 7KW Kubota Diesel Powered Whisper Watt Generator
-Fully Enclosed
-Powers machine to make it useable on any jobsite
-Phase: 1
-120/240
620k BTU Heater
4,000’ of hose
-Power Reel (In and out)
THAW AREA – 6,000 ft² (std), 11,200 ft² (w/acc)
CURE AREA – 8,000 ft² (std), 25,000 ft² (w/acc)
The large 620,000 BTU heater provides you with ample BTU’s for ground thaw, concrete cure & space or fluid heating applications
Patented Flow Reverser – Eliminates hot and cold zones in the thaw pattern
Reduces time & fuel costs by up to 50%
Consistent curing temperatures across the entire slab means the whole slab cures at the same rate
Patented Combustion Environment Control System preheats the fuel and air used for combustion
No need to bring it in to a heated shop before it goes out on the job. The preheater allows the unit to start & run even in sub 40 degree conditions
Industry leading multi-loop ground thaw set-up for job site flexibility and optimum fluid circulation & heat transfer
Manifold System allows for fan coils or heat exchangers to plug in for space heating or fluid heating
Unit is fully functional and ready to go to work!
2005 Ground Heater E3000 Enclosed Ground Heater Construction Heater Concrete Curer
2005 Ground Heater E3000
Hours: 13,804
Diesel Fired
Dual rear hose set up
Engineered for reliable performance and trouble-free starts
up to 140 hours of run time
the E3000 will provide maximum flow and ensure consistent heat delivery for thawing and curing applications.
The E3000 thaws or cures up to 6,000 sq. ft. With accessories this heater will cure up to 18,000 sq. ft. or provide 535,000 cu. ft. of dry heat at 83% efficiency, the highest in the industry.
With 3,000 ft. of hose and a hydraulic hose system, the E3000 allows for single person set-up and placement, for greater flexibility on all applications.
Positive displacement pump provides maximum flow and consistent heat delivery for thawing and curing.
One pump per hose loop means delivery of maximum Btu’s per hour.
Digital temperature controller with push button adjustment allows operators to easily adjust Heat Transfer Fluid (HTF) output temperature for all concrete curing applications.
Performance monitoring strobe light indicates from a distance that all systems are operating properly.
Unit is fully functional and has just been fully serviced!
Ready to work!
Recent Comments