SwapHogg 12′ Chipper Body DESH1250 SDT-S/CT1294
- 12′ Container with bolt on Chipper top
- Integrated ladder rack
- Vented Side walls
- Single door
- 3″ Structural channel
- cross members spaced 16″ on center
- Floor constructed with 10 GA steel
- Front, side, & gate panels
- constructed with 12 GA steel
- Doors constructed with 3″x 3″ tubing
- Rear posts constructed with 3/16″ steel
- Front & side top rails constructed with
- 3″x 3″ tubing
- PPG cured paint w/ corrosion resistant epoxy primer
- Steel ground rollers
- Compatible with SwapHogg and Switch & Go systems
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2025 Norstar Low Pro/Service Utility SD0868458 Truck Body
Adjustable Runners 4″ x 38″ – 42″
Standard 24″ OC Cross Members
Diam Plate Steel .125″ Flat Deck w/ GN Cap
Standard 3.5″ Tube x 37.75″ Head Rack
Steel Smooth Fenders
Front & Rear Paddle Latch Tool Boxes
Standard Adjustable Shelves
Tail Gate Fold Down w/ Latch
4 Recessed D-Rings 5000 lbs
2 5/16″ Raw Steel 1″ Raised 30k Ball
4/5/7 Way Plug Rear & 7 Way Plug in Gooseneck Well
Standard LED Light Package
2 Led Rear Working Lights w/ Alum Housing & 2.5″ Rec Hitch
Mud Flap Mounting Brackets L & R
Color: Black
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2025 Norstar Skirted Flatbed ST0868458 Truck Body
Adjustable Runners 4″ x 38″ – 42″
Standard 24″ OC Cross Members
Diam Plate Steel .125″ Flat Deck w/ GN Cap
Side Stake Pockets & Rub Rail
Standard 3.5″ Tube x 37.75″ Head Rack
Steel Smooth Fenders
Front & Rear Paddle Latch Tool Boxes
2 5/16″ Raw Steel 1″ Raised 30k Ball
4/5/7 Way Plug Rear & 7 Way Plug in Gooseneck Well
Standard LED Light Package
Mud Flap Mounting Brackets L & R
Color: Black
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2025 DURAMAG S-SERIES ALUMINUM UTILITY BED
- Standard Features
- All Aluminum Extruded Box Tube Construction
- Fully Welded Construction – No Bolts to Come Loose
- Extreme Duty .625″ Interlocking Extruded Flooring
- Heavy Slam Latch Tailgate
- Inner Bed Walls & Top of Compartments 3/16″ Smooth Sheet
- One Piece Sides
- Welded Fender Flares – Superior Strength & Rigidity
- Tread Plate Splash Guards on Front
- 40″ Compartment Height
- Radius Corner Traditional Swing Doors
- Blind Compression T-Handles
- Heavy Duty Hidden Hinges
- Adjustable Shelf Brackets in All Compartments (One Shelf Included in Each Compartment)
- Pass Through Panel Between Rear & Center Compartments
- LED Marker Lights, Installed
- LED Penny Lights for Compartments, Installed
- Ultra-Thin 5.5″ LED STT/BU Body Lights, Installed
- OEM Plug & Play Wire Harness, Body End Only (Adaptors Sold Separately)
- Powder Coated White, Black or Red
- Upfit Hardware Kit, Shipped Loose
- (1) Cast Aluminum Fuel Fill Dish, Installed (Street-side Front on Pickups / Street-side Rear on Cab Chassis)
Includes subframe and rear bumper. Additional options and features available.
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2025 DownEaster 6′6″ Dump insert IP110 W/ cab shield
- 12 gauge floor / 14 gauge side plates
- Two way tailgate (top/bottom hinged) with steel sub frame
- Electric over hydraulic pump with 10′ pendant control cord. & pre punched tarp mounting holes
- Spring loaded tailgate bottom release pins.
- Adjustable 3/16″ chain for spreading aggregate material & holding gate in down position
- Compact scissor hoist with 3.5″ diameter cylinder
- 47 degree dump angle
- Internal stake pockets
- DuPont™ Imron® Elite black oven cured paint with epoxy primer
- Double acting pump (power up / power down)
- 5 Year Warranty
- 1.6 cu yards
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2025 DownEaster 8′ Dump insert IP100-21 W/ cab shield
- 12 gauge floor / 14 gauge side plates
- Two way tailgate (top/bottom hinged) with steel sub frame
- Electric over hydraulic pump with 10′ pendant control cord. & pre punched tarp mounting holes
- Spring loaded tailgate bottom release pins.
- Adjustable 3/16″ chain for spreading aggregate material & holding gate in down position
- Compact scissor hoist with 3.5″ diameter cylinder
- 47 degree dump angle
- Internal stake pockets
- DuPont™ Imron® Elite black oven cured paint with epoxy primer
- Double acting pump (power up / power down)
- 5 Year Warranty
- 2.0 cu yards
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2025 Duramag Aluminum Flatbed TB08184-AL Truck Body
- All Extruded 6005 T6 Alum Box Tube Construction
- Long Sills to Compensate for Hump in Truck Frame
- G-Tube Perimeter Frame
- Extruded Aluminum Headboard w/Accessory Track
- OEM Plug & Play Wire Harness – Body End
- Cast Aluminum Fuel Fill Dish – Streetside Fronts
- 12″ Diamond Plate Apron
- 2×3.188 Long Sills
- 1.5″ x 3.125 Cross Members, 16″ OC
- T&G Extruded Alum Flooring
- All Pre-Wired w/LED Lights Inside Box Tube
- Stake Pockets & Rub Rail
- Lighted Headboard
*SUBFRAME SOLD SEPARATELY
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2025 Duramag Aluminum Skirted Hauler Bed HBTB09795SB Truck Body
- 18,000 lbs. 2.5” Receiver Hitch with 3-way Receptacle
- 2” x 4” Box Tube Steel Sub Frame
- Aluminum 2” x 3” Box Tube Cross Members
- 3 ½” x 3 ½” Integrated Steel Rear Bumper
- Headboard with Accessory Glide Track
- 30,000 lbs. Gooseneck hitch, compatible with B&W Gooseneck hitch accessories
- Fully Powder Coated Steel Subframe
- Cast Aluminum License Plate Holder
- Extruded Aluminum Flooring
- Skirted Sides with storage
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2025 Duramag Aluminum Dump Bed DB0969520SS
- All Extruded 6005 T6 Aluminum Construction
- 2×6 .250 Long Sills
- Extruded Unibody Floor with 2.5″ OC Bracing
- Rugged & Attractive Formed Side Walls
- Double Walled Sides (Eliminates Cargo Impact Printing)
- HD 4×6 .188 Rear Corner Posts
- Double Walled Tailgate with Stainless Hinge Pins
- Stainless Tailgate Actuator Hardware & Fasteners
- All Pre Wired with LED Lights Inside Box Tube
- 16″ Aluminum Cab Shield
- Manual Tarp Kit
- 20″ Sides
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2025 Duramag Aluminum Flatbed HBTB09795 Truck Body
- 18,000 lbs. 2.5” Receiver Hitch with 3-way Receptacle
- 2” x 4” Box Tube Steel Sub Frame
- Aluminum 2” x 3” Box Tube Cross Members
- 3 ½” x 3 ½” Integrated Steel Rear Bumper
- Headboard with Accessory Glide Track
- 30,000 lbs. Gooseneck hitch, compatible with B&W Gooseneck hitch accessories
- Fully Powder Coated Steel Subframe
- Cast Aluminum License Plate Holder
- Extruded Aluminum Flooring
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
Recent Comments