2020 Freightliner M2 106 Altec Material Handler Bucket Truck
2020 Freightliner M2 106
Cummins 6.7L Turbo Diesel
Allison Automatic Transmission
Odometer Reads: 72,515 Miles
4×2
WB: 190”
GVWR: 33,000lbs
Air Brakes
Trailer Air Hook Up
Pintle Hitch
Exhaust Brake
Locking Rear Diff
Bench Seat
A/C + Heat
AM/FM Radio
14′ Utility Service Bed w/ Storage Compartments
Strobe Lights
Good Tires all around!
Equipped with the following:
Altec AM55E Boom
56’ Platform Height / 61’ Working Height
-Rear Mounted Boom
Two Man Bucket
-Rated for 600lbs
Hydraulic Tool Circuit at platform
Material Handling System
-Rated for 2,000lbs
Boom is insulated for 46kv
Hydraulic Platform Rotation/Tilt
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at Upper and Lower Control Station
Altec boom was ANSI/Dielectrically tested!
Truck was Serviced, Greased and Vehicle Inspected!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2015+ INQUIRE FOR MORE DETAILS!
2017 Ford F550XL Altec Utility Bucket Truck
2017 Ford F550XL
6.7L Powerstroke Turbo Diesel
Automatic Transmission
Odometer reads: 80,779 Miles
4×2
A/C and Heat
AM/FM radio
Hydraulic Brakes
Bench Seat
18,000 GVWR
Pintle Hitch
9′ Utility Storage Box + 3′ Rear Bumper Platform
-w/ Material Storage Bins
Strobe Light
New Brake Pads and Rotors all around!
New Rear tires! Fronts like new!
Equipped with the following:
Altec AT40-G Boom
40’ Platform Height / 45’ Working Height
-Center Mounted Boom
Man a Half Bucket
-Rated for 400lbs
Hydraulic Platform Tilt
Hydraulic Platform Rotation
Hydraulic Tool outlets at bucket
Boom is insulated and rated for 46KV
Continuous Rotation
Upper and Lower Controls
-Lever Lowers
-Pistol Grip Uppers
Emergency Stop Valve at upper and lower controls
Altec boom was ANSI/Dielectrically tested!
Truck was Serviced, Greased and Vehicle Inspected!
2018 Morbark M12R 12” Wood Chipper
2020 Frost Fighter IDH1000QR Indirect Fired Mobile Construction Heater
2020 Frost Fighter IDH1000QR
Powered by Kubota Diesel
Diesel Fired
Hours: 7,463
IDF Heater (Indirect Fired Heater)
1,000,000 BTU
Air output volume: 4,800 Cubic Ft per minute
Up to 30 Hours or runtime on a single fuel fill
4x 11” Outlets
Self-Contained and fully enclosed
Pintle Hitch
Unit is serviced and ready to go to work!
2019 Vermeer BC1500 Wood Chipper
Powered by: Honda Gas Engine
33′ 6” Platform Height / 40′ Work Height / 20’ Horizontal Reach
Hydraulic Outriggers/Stabilizers
2WD Traction Drive Assist!
Electric Power to the Platform
Working Width: 11’ 8”
Basket Width: 3’ 7”
Minimum Weight: 3,306lbs
Overall Dimensions: (LxWxH) 14’9″x4’11″x6′3″
*1yr Factory Warranty (Parts & Labor) & 5yr Structural Warranty — Optional 2yr, 3yr & 4yr Warranties Available*
SEE ATTACHED SPEC SHEET IN PHOTOS!
NOT THE MODEL/CONFIGURATION YOU ARE LOOKING FOR?! WE CAN ORDER ANY MODEL YOU’D LIKE INQUIRE FOR MORE INFORMATION!
Powered by: DC Electric Motor (Batteries)
33′ 6” Platform Height / 40′ Work Height / 20’ Horizontal Reach
Hydraulic Outriggers/Stabilizers
2WD Traction Drive Assist!
Electric Power, Air and Water to the Platform
Working Width: 11’ 8”
Basket Width: 3’ 7”
Minimum Weight: 3,306lbs
Overall Dimensions: (LxWxH) 14’9″x4’11″x6′3″
*1yr Factory Warranty (Parts & Labor) & 5yr Structural Warranty — Optional 2yr, 3yr & 4yr Warranties Available*
SEE ATTACHED SPEC SHEET IN PHOTOS!
NOT THE MODEL/CONFIGURATION YOU ARE LOOKING FOR?! WE CAN ORDER ANY MODEL YOU’D LIKE INQUIRE FOR MORE INFORMATION!
2024 Genie AWP-30S Electric Vertical Mast Man Lift
2024 Genie AWP-30S
110V (Plug in)
Hour Meter reads: N/A
Platform Height: 29’6”
Working Height: 35” 6”
4x Outriggers
Outrigger Footprint (LxW): 6’4”x5’8”
Platform Dimensions (Standard) (LxW): 27”x26”
Platform Rated Capacity: 350lbs
Machine Weight: 798lbs
4x Solid Non-Marking Roller Wheels for easy moving!
Power to Platform
Dimensions stowed: 4’5” x 2’ 5”x 6’ 6”
Minor Cosmetic Blemishes from Transport (See Photos)
2022 Genie IWP-20S Electric Vertical Mast Man Lift
2022 Genie IWP-20S
12v DC Electric/110v
Platform Height: 20’3”
Working Height: 26” 3”
Platform Dimensions (Standard) (LxW): 27”x26”
Platform Rated Capacity: 350lbs
Machine Weight: 1,340lbs
4x Solid Non-Marking Roller Wheels for easy moving!
Onboard Charger
Power to Platform
Dimensions stowed: 5’ x 2’ 8”x 6’ 4”
2024 Genie GR-12 Electric Vertical Mast Man Lift
2024 Genie GR-12
24V Electric Powered
Hour Meter reads: .8 Hours
Platform Height: 11’4”
Working Height: 17” 4”
Platform Dimensions (Standard/retracted) (LxW): 35”x29.5”
Platform Dimensions (Standard-Extended) (LxW):: 55”x29.5”
Platform Rated Capacity: 500lbs
Platform Extension Deck Rated Capacity: 500lbs
Gradeability: 30%
Machine Weight: 1,652lbs
Solid Non-Marking Wheels
Onboard Charger
Power to Platform
Dimensions stowed: 4’ 5” x 2’ 6”x 5’ 10”
Minor Cosmetic Blemishes from Transport (See Photos)
Recent Comments