SwapHogg 10′ Roll-off Frame SH1510EW-G2 SH0915E
Standard Features
- Low-profile subframe and mounting height
- 6″ bore x 15″ stroke hoist, standard.
- 50 deg. Dump angle (10 ton) (13″ high side w/ drive on gate)
- 6″ x 2″ structural tube frame.
- Auto locking body latch w/ ergonomic pull handle.
- Warn 15K electric industrial winch w/ tensioner
- 303 Stainless side rollers pressed over greaseless bronze bearings
- 303 Stainless rear rollers pressed over DOM steel
- with greaseless/replaceable stainless shafts
- Stainless steel side guide rails
- Exterior-mounted body prop
- Stainless Steel pump cover
- Spacer plates between upper & lower frames minimize rust contact points
- “Winch-in” stop switch
- Able to accept other body brands
- 30′ EIPS 1/2″ cable w/ 4.5 ton swivel hook
- Nylon cable roller, self-lubricating, for less cable wear
- 4-button, in-cab, control pendant
- 1/0 GA battery cables w/ 600 amp fuse
- PPG cured paint w/corrosion-resistant epoxy primer
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
Powered by: (Hybrid) Kubota Diesel Engine & DC Electric Motor w/ Batteries
85′6″ Platform Height / 92′ Work Height / 62’ Horizontal Reach
4×4
Electric Power to the Platform
Non-Marking tires
40% Gradeability
150° Jib Boom
180° Rotating Basket
Transport Length: 23’ 11”
Basket Width: 7’ 10”
Basket Working load: 620lbs
Minimum Weight: 31,880lbs
Overall Dimensions: (LxWxH) 30’5″x8’2″x8′10″
*1yr Factory Warranty (Parts & Labor) & 5yr Structural Warranty — Optional 2yr, 3yr & 4yr Warranties Available*
SEE ATTACHED SPEC SHEET IN PHOTOS!
NOT THE MODEL/CONFIGURATION YOU ARE LOOKING FOR?! WE CAN ORDER ANY MODEL YOU’D LIKE INQUIRE FOR MORE INFORMATION!
Powered by: Kubota Diesel Engine
62′ Platform Height / 68’6” Work Height / 42’8″ Horizontal Reach
4×4
Electric Power to the Platform
Non-Marking tires
45% Gradeability
150° Jib Boom
160° Rotating Basket
Transport Length: 17’ 11”
Basket Width: 5’ 11”
Equipped with the Tough Cage Basket
Basket Working load: 550lbs
Minimum Weight: 14,790lbs
Overall Dimensions: (LxWxH) 22’x7’5″x7′2″
*1yr Factory Warranty (Parts & Labor) & 5yr Structural Warranty — Optional 2yr, 3yr & 4yr Warranties Available*
SEE ATTACHED SPEC SHEET IN PHOTOS!
NOT THE MODEL/CONFIGURATION YOU ARE LOOKING FOR?! WE CAN ORDER ANY MODEL YOU’D LIKE INQUIRE FOR MORE INFORMATION!
Powered by: Honda Gas Engine
33′ 6” Platform Height / 40′ Work Height / 20’ Horizontal Reach
Hydraulic Outriggers/Stabilizers
2WD Traction Drive Assist!
Electric Power to the Platform
Working Width: 11’ 8”
Basket Width: 3’ 7”
Minimum Weight: 3,306lbs
Overall Dimensions: (LxWxH) 14’9″x4’11″x6′3″
*1yr Factory Warranty (Parts & Labor) & 5yr Structural Warranty — Optional 2yr, 3yr & 4yr Warranties Available*
SEE ATTACHED SPEC SHEET IN PHOTOS!
NOT THE MODEL/CONFIGURATION YOU ARE LOOKING FOR?! WE CAN ORDER ANY MODEL YOU’D LIKE INQUIRE FOR MORE INFORMATION!
Powered by: DC Electric Motor (Batteries)
33′ 6” Platform Height / 40′ Work Height / 20’ Horizontal Reach
Hydraulic Outriggers/Stabilizers
2WD Traction Drive Assist!
Electric Power, Air and Water to the Platform
Working Width: 11’ 8”
Basket Width: 3’ 7”
Minimum Weight: 3,306lbs
Overall Dimensions: (LxWxH) 14’9″x4’11″x6′3″
*1yr Factory Warranty (Parts & Labor) & 5yr Structural Warranty — Optional 2yr, 3yr & 4yr Warranties Available*
SEE ATTACHED SPEC SHEET IN PHOTOS!
NOT THE MODEL/CONFIGURATION YOU ARE LOOKING FOR?! WE CAN ORDER ANY MODEL YOU’D LIKE INQUIRE FOR MORE INFORMATION!
2022 Genie IWP-20S Electric Vertical Mast Man Lift
2022 Genie IWP-20S
12v DC Electric/110v
Platform Height: 20’3”
Working Height: 26” 3”
Platform Dimensions (Standard) (LxW): 27”x26”
Platform Rated Capacity: 350lbs
Machine Weight: 1,340lbs
4x Solid Non-Marking Roller Wheels for easy moving!
Onboard Charger
Power to Platform
Dimensions stowed: 5’ x 2’ 8”x 6’ 4”
SwapHogg 12′ Chipper Body DESH1250 SDT-S/CT1294
Standard Features
- 12′ Container with bolt on Chipper top
- Integrated ladder rack
- Vented Side walls
- Single door
- 3″ Structural channel
- cross members spaced 16″ on center
- Floor constructed with 10 GA steel
- Front, side, & gate panels
- constructed with 12 GA steel
- Doors constructed with 3″x 3″ tubing
- Rear posts constructed with 3/16″ steel
- Front & side top rails constructed with
- 3″x 3″ tubing
- PPG cured paint w/ corrosion resistant epoxy primer
- Steel ground rollers
- Compatible with SwapHogg and Switch & Go systems
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2025 Norstar Skirted Flatbed ST0868458 Truck Body
Adjustable Runners 4″ x 38″ – 42″
Standard 24″ OC Cross Members
Diam Plate Steel .125″ Flat Deck w/ GN Cap
Side Stake Pockets & Rub Rail
Standard 3.5″ Tube x 37.75″ Head Rack
Steel Smooth Fenders
Front & Rear Paddle Latch Tool Boxes
2 5/16″ Raw Steel 1″ Raised 30k Ball
4/5/7 Way Plug Rear & 7 Way Plug in Gooseneck Well
Standard LED Light Package
Mud Flap Mounting Brackets L & R
Color: Black
Not sure which truck bed is right for you? Give us a call at 603.417.2112
DOWNEASTER 9′ STEEL DUMP BODY DED09396
Standard Features
- 10 gauge construction throughout
- Dirt shedding , sloped design at side plate and tailgate top
- Double panel side plates equal over 1/4″ thickness.
- Full depth 3/16″rear corner pillars incorporate recessed lighting, keyhole banjo eyes and lower tailgate pin receiver.
- All lighting is LED rubber mounted and NTEA and Federal compliant.
- 2 1/2″ shorter deck height (9′ only)
- Mounting height of 9.5″ chassis to floor (9′ only)
- 10″ board extension pockets ease of install & future optional / custom overhang.
- Self aligning rear latch release for the top gate pins
- Integrated tarp hooks
- DuPont™ Imron® Elite black oven cured paint w/ epoxy primer
FLOOR & UNDERSTRUCTURE
- 4″ x 5.7# Channel long sills and 3″ channel cross members (9′)
- 6″ x 8.2# Channel long sills (10′, 10.5′ 11′)
- 3/16″ Stainless formed 7″ long sills (SS body)
- 3″ stainless tubing, interlaced cross members (SS body)
- Two piece 10 gauge floor with 45 degree slopped corners where meets seamless side plate.
- Greasable Bronze bearings for underbody release mechanisms
TAILGATE
- Formed 10 gauge inner, outer and end panels.
- 1″ hardened pins, (1″ Stainless) with plasma cut latch receiving lock fingers
- Adjustable 1/4″ chain for spreading aggregate material & holding gate in down position
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2026 DURAMAG S-SERIES ALUMINUM UTILITY BED LONG BED
- Standard Features
- All Aluminum Extruded Box Tube Construction
- Fully Welded Construction – No Bolts to Come Loose
- Extreme Duty .625″ Interlocking Extruded Flooring
- Heavy Slam Latch Tailgate
- Inner Bed Walls & Top of Compartments 3/16″ Smooth Sheet
- One Piece Sides
- Welded Fender Flares – Superior Strength & Rigidity
- Tread Plate Splash Guards on Front
- 40″ Compartment Height
- Radius Corner Traditional Swing Doors
- Blind Compression T-Handles
- Heavy Duty Hidden Hinges
- Adjustable Shelf Brackets in All Compartments (One Shelf Included in Each Compartment)
- Pass Through Panel Between Rear & Center Compartments
- LED Marker Lights, Installed
- LED Penny Lights for Compartments, Installed
- Ultra-Thin 5.5″ LED STT/BU Body Lights, Installed
- OEM Plug & Play Wire Harness, Body End Only (Adaptors Sold Separately)
- Powder Coated White, Black or Red
- Upfit Hardware Kit, Shipped Loose
- (1) Cast Aluminum Fuel Fill Dish, Installed (Street-side Front on Pickups / Street-side Rear on Cab Chassis)
Includes subframe and rear bumper. Additional options and features available.
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
Recent Comments