2026 DownEaster 11′ Stainless Dump Body DEDS11396
10 gauge construction throughout
Dirt shedding , sloped design at side plate and tailgate top
Double panel side plates equal over 1/4″ thickness.
Full depth 3/16″rear corner pillars incorporate recessed lighting, keyhole banjo eyes and lower tailgate pin receiver.
All lighting is LED rubber mounted and NTEA and Federal compliant.
2 1/2″ shorter deck height (9′ only)
Mounting height of 9.5″ chassis to floor (9′ only)
10″ board extension pockets ease of install & future optional / custom overhang.
Self aligning rear latch release for the top gate pins
Integrated tarp hooks
DuPont™ Imron® Elite black oven cured paint w/ epoxy primer
FLOOR & UNDERSTRUCTURE
4″ x 5.7# Channel long sills and 3″ channel cross members (9′)
6″ x 8.2# Channel long sills (10′, 10.5′ 11′)
3/16″ Stainless formed 7″ long sills (SS body)
3″ stainless tubing, interlaced cross members (SS body)
Two piece 10 gauge floor with 45 degree slopped corners where meets seamless side plate.
Greasable Bronze bearings for underbody release mechanisms
TAILGATE
Formed 10 gauge inner, outer and end panels.
1″ hardened pins, (1″ Stainless) with plasma cut latch receiving lock fingers
Adjustable 1/4″ chain for spreading aggregate material & holding gate in down position
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
SwapHogg 11′ Drive-on Platform Body with Dovetail DESH1196 PB-DT
Available in 9′ and 11′
38″ bulkhead
16″ dovetail
Corner chain keys
External stake pockets w/rub rails
1/4″ tread plate floor
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
Powered by: BI-Energy (Honda Gas Engine + Battery Powered)
42 ′ Platform Height / 48 ′6” Work Height / 25 ’ Horizontal Reach
Hydraulic Outriggers/Stabilizers
Electric Power to the Platform
Working Width: 12’ 6”
Basket Width: 4’ 7”
Minimum Weight: 3,990lbs
Overall Dimensions: (LxWxH) 18’3″x5’3″x6′7″
*1yr Factory Warranty (Parts & Labor) & 5yr Structural Warranty — Optional 2yr, 3yr & 4yr Warranties Available*
SEE ATTACHED SPEC SHEET IN PHOTOS!
Optional Upgrades :
A) Traction Drive/2WD Assist
B) AIR to Platform
C) WATER to Platform
NOT THE MODEL/CONFIGURATION YOU ARE LOOKING FOR?! WE CAN ORDER ANY MODEL YOU’D LIKE INQUIRE FOR MORE INFORMATION!
2019 International 4300 Altec Material Handler Bucket Truck
2025 Norstar Deluxe Flatbed SL0868456 Truck Body
*Fits – 99-16 Ford 8′ SRW & GMC/Chevy 8′ SRW all years
Structural Steel Frame
2025 Norstar Deluxe Hauler WH0868456 Truck Body
Structural Steel Frame
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2025 Norstar Flatbed SR0949760 Truck Body
Adjustable Runners 4″ x 38″ – 42″
Standard 24″ OC Cross Members
Diam Plate Steel .125″ Flat Deck w/ GN Cap
Side Stake Pockets & Rub Rail
Standard 3.5″ Tube x 37.75″ Head Rack
2 5/16″ Raw Steel 1″ Raised 30k Ball
4/5/7 Way Plug Rear & 7 Way Plug in Gooseneck Well
Standard LED Light Package
Adjustable Mud Flap Mounting Brackets L & R
Color: Black
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2026 Haulotte 55XA 4×4 Hybrid Self Propelled Man Lift
Powered By: Bi-Energy (Kohler Gas Engine – 26Hp & 24v DC Electric Battery Motor ) (4x 6V Batteries 260 Amp-Hr Batteries)
Optional Motor Upgrades:
Kubota Gas Motor +$645
Kubota Diesel Motor +$1,500
55′3″ Platform Height / 61′3″ Work Height / 33’5″ Horizontal Reach
Up and Over Height: 23’ 1”
Hydraulic Jib Length: 4’3” w/ 150° Vertical Motion
Lift Capacity: 500lbs
4×4
Four wheel Steer_
Gradeability: 45%
Hydraulic Outriggers/Stabilizers
-Self Leveling System and Self Leveling Platform
Electric Power, Air and Water to the Platform
Inboard 25 Amp Charger
Onboard 4,000W Generator (for charging battery system)
Integrated Forklift Pockets
Working Width: (LxW) 13’ 11” x12’9”
Turntable Rotation: 350° non-continuous
Basket Width: 5’
Minimum Weight: 6,000lbs
Overall Dimensions: (LxWxH) 21’2″x5’8″x6′9″
*2yr Factory Warranty (Parts & Labor) & 5yr Structural Warranty
SEE ATTACHED SPEC SHEET IN PHOTOS!
AUTHORIZED HAULOTTE DEALER IN PARTS, SERVICE AND SALES!
NOT THE MODEL/CONFIGURATION YOU ARE LOOKING FOR?!
WE CAN ORDER ANY MODEL YOU’D LIKE INQUIRE FOR MORE INFORMATION!
2026 Haulotte 5533A Towable Man Lift
Powered by: 24v DC Electric Motor w/ 4x 6V 245 Amp-Hr Batteries
55′3″ Platform Height / 61′3″ Work Height / 33’5″ Horizontal Reach
Up and Over Height: 23’ 1”
Hydraulic Jib Length: 4’3” w/ 150° Vertical Motion
Lift Capacity: 500lbs
Hydraulic Outriggers/Stabilizers
-Self Leveling System and Self Leveling Platform
Electric Power, Air and Water to the Platform
Inboard 25 Amp Charger
Integrated Forklift Pockets
Hydraulic Surge Brakes (Trailer)
Working Width: (LxW) 14’8” x15’
Turntable Rotation: 350° non-continuous
Basket Width: 4’1”
Minimum Weight: 4.800lbs
Overall Dimensions: (LxWxH) 23’8″ x 5’7″ x 6′9″
*2yr Factory Warranty (Parts & Labor) & 5yr Structural Warranty
SEE ATTACHED SPEC SHEET IN PHOTOS!
Ask About Optional Upgrades:
A) Platform Rotator – $2,050 B) Drive & Set (2WD Assist/Traction-Drive) – $6,300 C) Spare Tire & Mounting Kit – $725 D) Honda Gas Generator – $4,150
AUTHORIZED HAULOTTE DEALER IN PARTS, SERVICE AND SALES!
NOT THE MODEL/CONFIGURATION YOU ARE LOOKING FOR?!
WE CAN ORDER ANY MODEL YOU’D LIKE INQUIRE FOR MORE INFORMATION!
Recent Comments