2019 International 4300 Altec Material Handler Bucket Truck
2019 International 4300
Cummins 6.7L Turbo Diesel
Allison Automatic Transmission
Odometer Reads: 147,652
PTO Hours: 2,932
4×2
WB: 197”
GVWR: 33,000lbs
Air Brakes
Trailer Air Supply
Pintle Hitch
Exhaust Brake
Locking Rear Diff
Air Ride Driver Seat + Passenger Bench Seat
A/C + Heat
AM/FM Radio
Reverse Camera
Total Bed Length: 16′ (14′ Utility Bed + 2′ Rear Deck Space)
Strobe Lights
Good Tires all around!
Equipped with the following:
Altec AA55E Boom
56’ Platform Height / 61’ Working Height
-Rear Mounted Boom
Single Man Bucket
-Rated for 400lbs
Hydraulic Tool Circuit at platform
Material Handling System
-Rated for 2,000lbs
Boom is insulated for 46kv
Hydraulic Platform Rotation/Tilt
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at All Upper and Lower Control Station
Altec Boom was ANSI/Dielectrically tested!
Truck was Serviced, Greased and DOT Inspected!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2017+ INQUIRE FOR MORE DETAILS!
2019 Freightliner M2 106 Altec Material Handler Bucket Truck
2019 Freightliner M2 106
Cummins 6.7L Turbo Diesel
Allison Automatic Transmission
Odometer Reads: 89,466
4×2
WB: 190”
GVWR: 33,000lbs
Air Brakes
Trailer Air Supply
Pintle Hitch
Exhaust Brake
Bench Seat
A/C + Heat
AM/FM Radio
Total Bed Length: 16′ (14′ Utility Bed + 2′ Rear Deck Space)
Strobe Lights
Good Tires all around!
Equipped with the following:
Altec AA55 Boom
56’ Platform Height / 61’ Working Height
-Rear Mounted Boom
Two Man Bucket
-Rated for 700lbs
Hydraulic Tool Circuit at platform
Material Handling System
-Rated for 2,000lbs
Boom is insulated for 46kv
Hydraulic Platform Rotation/Tilt
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at All Upper and Lower Control Station
Altec Boom was ANSI/Dielectrically tested!
Truck was Serviced, Greased and DOT Inspected!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2017+ INQUIRE FOR MORE DETAILS!
2016 Genie Z-62/40 4×4 Boom Man Lift
2016 Genie Z-62/40
Ford MSG Dual Fuel Motor Gas/LPG Motor
-LP Tank included
Hour meter reads: 2,742 hours
4×4
62’ Platform Height / 68’ Working Height
40’9” Horizontal Reach
25’7” Up and Over Clearance Max
5’ Jib
8’ Man Basket
Basket Rated Weight: 500lbs
Rated Gradeability: 45%
Onboard Generator (Power to the Platform)
355/55D625 foam Filled Tires
Good tires all around!
Operating Weight: 23,259lbs
Unit was Greased and Serviced!
2026 DEDS09396 2.5-5 yard, STAINLESS, DownEaster 9′ Dump Body with CS615 Hoist
- 10 gauge construction throughout
- Dirt shedding , sloped design at side plate and tailgate top
- Double panel side plates equal over 1/4″ thickness.
- Full depth 3/16″rear corner pillars incorporate recessed lighting, keyhole banjo eyes and lower tailgate pin receiver.
- All lighting is LED rubber mounted and NTEA and Federal compliant.
- 2 1/2″ shorter deck height (9′ only)
- Mounting height of 9.5″ chassis to floor (9′ only)
- 10″ board extension pockets ease of install & future optional / custom overhang.
- Self aligning rear latch release for the top gate pins
- Integrated tarp hooks
- DuPont™ Imron® Elite black oven cured paint w/ epoxy primer
FLOOR & UNDERSTRUCTURE
- 4″ x 5.7# Channel long sills and 3″ channel cross members (9′)
- 6″ x 8.2# Channel long sills (10′, 10.5′ 11′)
- 3/16″ Stainless formed 7″ long sills (SS body)
- 3″ stainless tubing, interlaced cross members (SS body)
- Two piece 10 gauge floor with 45 degree slopped corners where meets seamless side plate.
- Greasable Bronze bearings for underbody release mechanisms
TAILGATE
- Formed 10 gauge inner, outer and end panels.
- 1″ hardened pins, (1″ Stainless) with plasma cut latch receiving lock fingers
- Adjustable 1/4″ chain for spreading aggregate material & holding gate in down position
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
SwapHogg 9′ Drive-on Platform Body with Dovetail SH0996 PB-DT
- Available in 9′ and 11′
- 38″ bulkhead
- 16″ dovetail
- Corner chain keys
- External stake pockets w/rub rails
- 1/4″ tread plate floor
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
SwapHogg 14′ Container Body SH1415-S
- Single door
- 3″ Structural channel
- cross members spaced 16″ on center
- Floor constructed with 10 GA steel
- Front, side, & gate panels
- constructed with 12 GA steel
- Doors constructed with 3″x 3″ tubing
- Rear posts constructed with 3/16″ steel
- Front & side top rails constructed with
- 3″x 3″ tubing
- PPG cured paint w/ corrosion resistant epoxy primer
- Steel ground rollers
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
SwapHogg 10′ Container Body SH1012-S
Standard Features
- Single door
- 3″ Structural channel
- cross members spaced 16″ on center
- Floor constructed with 10 GA steel
- Front, side, & gate panels
- constructed with 12 GA steel
- Doors constructed with 3″x 3″ tubing
- Rear posts constructed with 3/16″ steel
- Front & side top rails constructed with
- 3″x 3″ tubing
- PPG cured paint w/ corrosion resistant epoxy primer
- Steel ground rollers
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2024 NIFTYLIFT SD50D 4×4 56’ MAN BOOM LIFT
This was a Demo Unit! It will come with a one year warranty!
2024 NIFTYLIFT SD50D
Powered by: Kubota Diesel
Hours: 60.1
49′ 6” Platform Height / 56’ Work Height / 28’ 6” Horizontal Reach
Hydraulic Outriggers/Stabilizers
4×4
Width: 5’ 3”
Working Width: 14’ 5”
Basket Width: 3’ 7”
Minimum Weight: 5,950lbs
SEE ATTACHED SPEC SHEET IN PHOTOS!
NOT THE MODEL/CONFIGURATION YOU ARE LOOKING FOR?! WE CAN ORDER ANY MODEL YOU’D LIKE INQUIRE FOR MORE INFORMATION!
SwapHogg 13′ Roll-off Frame SH1315E
Standard Features
- Low profile sub frame and mounting height
- 50 degree dump angle (10 ton)
- 6″ bore x 15″ Champion stroke hoist, standard
- 6″ x 2″ structural tube frame
- Warn 15k electric industrial winch w/ stainless steel tensioner
- 30′ EIPS 1/2″ cable w/ 4.5 ton swivel hook
- 303 stainless side rollers pressed over greaseless bronze bearings
- Exterior mounted body prop
- Spacer plates between upper & lower frames minimizes rust contact points
- “Winch-In” stop switch
- Nylon cable roller, self lubricating for less cable wear
- 4 button, in cab, control pendant
- PPG cured paint w/ corrosion resistant epoxy prime
- Able to accept other body brands
- Fully Hydraulic option available
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
SwapHogg 9′ Roll-off Frame SH0915E
Standard Features
- Low profile sub frame and mounting height
- 50 degree dump angle (10 ton)
- 6″ bore x 15″ Champion stroke hoist, standard
- 6″ x 2″ structural tube frame
- Warn 15k electric industrial winch w/ stainless steel tensioner
- 30′ EIPS 1/2″ cable w/ 4.5 ton swivel hook
- 303 stainless side rollers pressed over greaseless bronze bearings
- Exterior mounted body prop
- Spacer plates between upper & lower frames minimizes rust contact points
- “Winch-In” stop switch
- Nylon cable roller, self lubricating for less cable wear
- 4 button, in cab, control pendant
- PPG cured paint w/ corrosion resistant epoxy prime
- Able to accept other body brands
- Fully Hydraulic option available
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
Recent Comments