2013 Yale ERCO65VGN48TE083 Electric Forklift
2013 Yale ERCO65VGN48TE083
Powered by 48V Battery System (Charger NOT Included)
Hour meter reads: 13,738
6,000lb Lifting Capacity
3 Stage Mast
175“ Max Lifting Height
32” Forks
Cascade 28G-FDS-160 Double Pallet Extendable Mast (See info below)
42” Main Mast w/ 26” outside to outside of forks and 80” Outside to Outside of Mast when extended)
Power Shift Forks and Mast
Sold Rubber non marking tires
Unit Weight: 12,785lbs
Greased
Runs and Operates!
2014 Freightliner 114SD Hiab Knuckle Boom Crane Truck
2014 Freightliner 114SD
Detroit DD13 Turbo Diesel
-500hp
Odometer reads: 183,095 Miles
Total Engine Hours: 8,006
Eaton 10 Speed Transmission
Tandem Axle with Drop Tag Axle
GVWR: 66,000lbs
Axle Capacity Front: 20,000lbs
Axle Capacity Rear: 46,000lbs
Locking Rear Diff
Locking Interaxle Diff
Gear Ratio: 4.10
Engine Brake
WB: 288″
Air Brakes
Pintle Hitch
A/C and Heat
AM/FM Radio
Air Ride Driver Seat
Power Windows
Air Ride Cab
20’ Flatbed
Good Tires all around
Equipped with the following:
-Hiab 322E-5 Hi-Pro Knuckle Boom Crane
-72′ Vertical Reach
-64’5” Side Reach
-20,500lb Lifting Capacity (Minus Jib)
-1,490lbs at 64’5” side reach
-2x Outriggers
-Lever Lowers
-Wireless Remote Control
Hiab Crane will be ANSI Inspected before sold!
Truck will be Serviced, Greased, and Vehicle Inspected before sold!
2016 Altec DRM12 12″ Wood Chipper
2016 Altec DRM12
Powered by Kubota Diesel Engine
-85HP
Hour meter reads: 1.7 Hours (Tach was just replaced Hours Unknown)
12” Chipping Capacity!
AutoFeed System (Ask and we can send you a video of it operating)
Drum Chipper
Hydraulic Crush/Opening Feeder
Pintle Hitch
Good Tires!
New Oil Pan
Good Running machine that was just Serviced and Greased / Could use cosmetic restoration
2025 DownEaster 6′6″ Dump insert IP110 W/ cab shield
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2015 Kenworth T440 Hiab Knuckle Boom Crane Truck
2015 Kenworth T440
Paccar PX-9 Turbo Diesel
-370hp
Odometer reads: 138,100 Miles
Total Engine Hours: 8,929
Allison Automatic Transmission
Tandem Axle
GVWR: 66,000lbs
Axle Capacity Front: 20,000lbs
Axle Capacity Rear: 46,000lbs
Locking INTR Axle
Gear Ratio: 5.38
Engine Brake
WB: 276″
Air Brakes
Pintle Hitch
A/C and Heat
AM/FM Radio
Air Ride Driver Seat
Bench Passenger Seat
22’6″ Flatbed
Good Tires all around
Equipped with the following:
-Hiab 322E-5 Hi-Pro Knuckle Boom Crane
-72′ Vertical Reach
-64’5” Side Reach
-20,500lb Lifting Capacity (Minus Jib)
-1,490lbs at 64’5” side reach
-2x Outriggers
-Lever Lowers
-Wireless Remote Control
Hiab Crane was ANSI Inspected!
Truck was Serviced, Greased, and Vehicle Inspected!
2015 Ford F750 Terex Material Handler Bucket Truck
2015 Ford F750
Cummins 6.7L Turbo Diesel
Allison Automatic Transmission
Odometer Reads: 92,613 Miles
PTO Hours: 3,025 Hours
4×2
WB: 194”
GVWR: 33,000lbs
Air Brakes
Trailer Air Brakes
Pintle Hitch
Diff Lock
Driver Air Ride Seat + Passenger Bench Seat
A/C + Heat
AM/FM Radio
Total Bed Length: 16’6″ (14′ Utility Bed w/ Storage Compartments + 2’6″ Rear Deck Space)
Strobe Lights
Good Tires all around!
Equipped with the following:
Terex Hi-Ranger 5TC-55
55’ Platform Height / 60’ Working Heigh
-Rear Mounted Boom
Two Man Bucket
-Rated for 700lbs
Hydraulic Tool Circuit at platform
Material Handling Jib System at Bucket
-Rated for 2,000lbs
Boom is insulated for 69kv
Hydraulic Platform Rotation/Tilt
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at All Upper and Lower Control Station
Terex Boom will be ANSI/Dielectrically tested before sold!
Truck will be Serviced, Greased and Vehicle Inspected before sold!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2015+ INQUIRE FOR MORE DETAILS!
2020 International MV607 Altec Material Handler Bucket Truck
2020 International MV607
Cummins 6.7L Turbo Diesel
Allison Automatic Transmission
Odometer Reads: 62,429 Miles
4×2
WB: 193”
GVWR: 33,000lbs
Air Brakes
Trailer Air Brakes
Pintle Hitch
Bench Seat
A/C + Heat
AM/FM Radio
14′ Utility Service Bed w/ Storage Compartments_
Strobe Lights
Good Tires all around!
Equipped with the following:
Altec AA55 Boom
56’ Platform Height / 61’ Working Height
-Rear Mounted Boom
Two Man Bucket
-Rated for 700lbs
Hydraulic Tool Circuit at platform
Material Handling System
-Rated for 2,000lbs
Boom is insulated for 46kv
Hydraulic Platform Rotation/Tilt
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at All Upper and Lower Control Station
Altec Boom was ANSI/Dielectrically tested!
Truck was Serviced, Greased and Vehicle Inspected!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2015+ INQUIRE FOR MORE DETAILS!
2014 Western Star 4700SB Fassi Knuckle Boom Crane Truck
2014 Western Star 4700SB
Detroit DD13 12.8L Turbo Diesel
-500hp
Odometer reads: 55,654 Miles
Total Engine Hours: 8,413
Eaton 8LL Transmission
Tandem Axle w/ Tri Drop Axle
GVWR: 66,000lbs
Axle Capacity Front: 20,000lbs
Axle Capacity Rear: 46,000lbs
Locking INTR Axle
Rear Locking Diff
Rear Ratio: 4.10
Jake Brake
WB: 273″
Air Brakes
A/C and Heat
AM/FM Radio
Air Ride Driver Seat
Bench Passenger Seat
24’6″ Flatbed w/ Tiedowns
Good Tires all around
Equipped with the following:
-Fassi F385A.2.26 E-DYNAMIC Knuckle Boom Crane
-85′ Vertical Reach
-74’4” Side Reach
– 5,886lb Lifting Capacity
-1,466lbs at 74’4” side reach
-4x Outriggers
-Lever Lowers
-Wireless Remote Control
Fassi Crane was ANSI Inspected!
Truck was Serviced, Greased, and Vehicle Inspected!
2017 International 4300 Altec Material Handler Bucket Truck
2017 International 4300
Cummins 6.7L Turbo Diesel
Allison Automatic Transmission
Odometer Reads: 75,657 Miles
4×2
WB: 193”
GVWR: 33,000lbs
Locking Diff
Air Brakes
Pintle Hitch
Bench Seat
A/C + Heat
AM/FM Radio
14′ Utility Service Bed w/ Storage Compartments
Strobe Lights
Good Tires all around!
Equipped with the following:
Altec AA55 Boom
56’ Platform Height / 61’ Working Height
-Rear Mounted Boom
Two Man Bucket
-Rated for 700lbs
Hydraulic Tool Circuit at platform
Material Handling System
-Rated for 2,000lbs
Boom is insulated for 46kv
Hydraulic Platform Rotation/Tilt
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at All Upper and Lower Control Station
Altec Boom was ANSI/Dielectrically tested !
Truck was Serviced, Greased and Vehicle Inspected !
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2015+ INQUIRE FOR MORE DETAILS!
• Bed Size(W x L): 82” x 16’
• Overall Size (W x L): x 102” x 22’
• 2x Dexter 7,000lb E-Z Lube Axles w/ Self Adjust Electric Brakes
• GVWR: 14,000lbs
• Empty Weight: 4,490lbs
• Payload: 9,510lbs
• Low Profile 5 Stage Front Telescopic Cylinder
• Heavy Duty 8” I-Beam Frame
• 24” High 12 GA Strenx Formed Walls
• 11 GA Hardox Steel Floor
• 3 Way Tailgate – Barn Doors, Spread/Dump and Tailgate
• 6’ Slide-In Ladder Ramps
• Reinforced Enclosed Top Rail with Stake Pockets
• (4) D-Rings Welded On Side Wall
• Dexter EZ Lube Axles with Self Adjusting Brakes
• Demco 2⁵/₁₆” Adjustable Coupler, Flat Plate Mount
• Removable Zinc Plated Safety Chains with Stow Hooks
• 12K Hydraulic Jack
• Front & Rear Mounted Side Steps
• High-Quality Urethane Paint Primer and Top Coat
• Sealed Phillips® Modular Wiring Harness
• Grommet Mounted LED Lights
• Under Bed Tool Storage Compartment
• 11GA Diamond Plate Fenders
• Lockable Toolbox with Separate Compartment for Hydraulics
• DLH 12V Hydraulic Power Unit (High Flow)
• 12V Deep Cycle Battery and Onboard Battery Charger
• Integrated Tarp Valance
• Spare Tire Mount
• Rear Support Stands
• Mesh Tarp and Roller Kit
• Mod Wheels and Radial Tires
• Tire Size: ST235/80R16
• 3/YR Manufacturer Warranty
Recent Comments