SwapHogg 12′ Chipper Body DESH1250 SDT-S/CT1294
- 12′ Container with bolt on Chipper top
- Integrated ladder rack
- Vented Side walls
- Single door
- 3″ Structural channel
- cross members spaced 16″ on center
- Floor constructed with 10 GA steel
- Front, side, & gate panels
- constructed with 12 GA steel
- Doors constructed with 3″x 3″ tubing
- Rear posts constructed with 3/16″ steel
- Front & side top rails constructed with
- 3″x 3″ tubing
- PPG cured paint w/ corrosion resistant epoxy primer
- Steel ground rollers
- Compatible with SwapHogg and Switch & Go systems
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2025 Norstar Low Pro/Service Utility SD0868458 Truck Body
Adjustable Runners 4″ x 38″ – 42″
Standard 24″ OC Cross Members
Diam Plate Steel .125″ Flat Deck w/ GN Cap
Standard 3.5″ Tube x 37.75″ Head Rack
Steel Smooth Fenders
Front & Rear Paddle Latch Tool Boxes
Standard Adjustable Shelves
Tail Gate Fold Down w/ Latch
4 Recessed D-Rings 5000 lbs
2 5/16″ Raw Steel 1″ Raised 30k Ball
4/5/7 Way Plug Rear & 7 Way Plug in Gooseneck Well
Standard LED Light Package
2 Led Rear Working Lights w/ Alum Housing & 2.5″ Rec Hitch
Mud Flap Mounting Brackets L & R
Color: Black
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2025 Norstar Skirted Flatbed ST0868458 Truck Body
Adjustable Runners 4″ x 38″ – 42″
Standard 24″ OC Cross Members
Diam Plate Steel .125″ Flat Deck w/ GN Cap
Side Stake Pockets & Rub Rail
Standard 3.5″ Tube x 37.75″ Head Rack
Steel Smooth Fenders
Front & Rear Paddle Latch Tool Boxes
2 5/16″ Raw Steel 1″ Raised 30k Ball
4/5/7 Way Plug Rear & 7 Way Plug in Gooseneck Well
Standard LED Light Package
Mud Flap Mounting Brackets L & R
Color: Black
Not sure which truck bed is right for you? Give us a call at 603.417.2112
DOWNEASTER 9′ STEEL DUMP BODY DED09396
- 10 gauge construction throughout
- Dirt shedding , sloped design at side plate and tailgate top
- Double panel side plates equal over 1/4″ thickness.
- Full depth 3/16″rear corner pillars incorporate recessed lighting, keyhole banjo eyes and lower tailgate pin receiver.
- All lighting is LED rubber mounted and NTEA and Federal compliant.
- 2 1/2″ shorter deck height (9′ only)
- Mounting height of 9.5″ chassis to floor (9′ only)
- 10″ board extension pockets ease of install & future optional / custom overhang.
- Self aligning rear latch release for the top gate pins
- Integrated tarp hooks
- DuPont™ Imron® Elite black oven cured paint w/ epoxy primer
FLOOR & UNDERSTRUCTURE
- 4″ x 5.7# Channel long sills and 3″ channel cross members (9′)
- 6″ x 8.2# Channel long sills (10′, 10.5′ 11′)
- 3/16″ Stainless formed 7″ long sills (SS body)
- 3″ stainless tubing, interlaced cross members (SS body)
- Two piece 10 gauge floor with 45 degree slopped corners where meets seamless side plate.
- Greasable Bronze bearings for underbody release mechanisms
TAILGATE
- Formed 10 gauge inner, outer and end panels.
- 1″ hardened pins, (1″ Stainless) with plasma cut latch receiving lock fingers
- Adjustable 1/4″ chain for spreading aggregate material & holding gate in down position
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2025 DURAMAG S-SERIES ALUMINUM UTILITY BED LONG BED
- Standard Features
- All Aluminum Extruded Box Tube Construction
- Fully Welded Construction – No Bolts to Come Loose
- Extreme Duty .625″ Interlocking Extruded Flooring
- Heavy Slam Latch Tailgate
- Inner Bed Walls & Top of Compartments 3/16″ Smooth Sheet
- One Piece Sides
- Welded Fender Flares – Superior Strength & Rigidity
- Tread Plate Splash Guards on Front
- 40″ Compartment Height
- Radius Corner Traditional Swing Doors
- Blind Compression T-Handles
- Heavy Duty Hidden Hinges
- Adjustable Shelf Brackets in All Compartments (One Shelf Included in Each Compartment)
- Pass Through Panel Between Rear & Center Compartments
- LED Marker Lights, Installed
- LED Penny Lights for Compartments, Installed
- Ultra-Thin 5.5″ LED STT/BU Body Lights, Installed
- OEM Plug & Play Wire Harness, Body End Only (Adaptors Sold Separately)
- Powder Coated White, Black or Red
- Upfit Hardware Kit, Shipped Loose
- (1) Cast Aluminum Fuel Fill Dish, Installed (Street-side Front on Pickups / Street-side Rear on Cab Chassis)
Includes subframe and rear bumper. Additional options and features available.
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2025 DURAMAG S-SERIES ALUMINUM UTILITY BED
- Standard Features
- All Aluminum Extruded Box Tube Construction
- Fully Welded Construction – No Bolts to Come Loose
- Extreme Duty .625″ Interlocking Extruded Flooring
- Heavy Slam Latch Tailgate
- Inner Bed Walls & Top of Compartments 3/16″ Smooth Sheet
- One Piece Sides
- Welded Fender Flares – Superior Strength & Rigidity
- Tread Plate Splash Guards on Front
- 40″ Compartment Height
- Radius Corner Traditional Swing Doors
- Blind Compression T-Handles
- Heavy Duty Hidden Hinges
- Adjustable Shelf Brackets in All Compartments (One Shelf Included in Each Compartment)
- Pass Through Panel Between Rear & Center Compartments
- LED Marker Lights, Installed
- LED Penny Lights for Compartments, Installed
- Ultra-Thin 5.5″ LED STT/BU Body Lights, Installed
- OEM Plug & Play Wire Harness, Body End Only (Adaptors Sold Separately)
- Powder Coated White, Black or Red
- Upfit Hardware Kit, Shipped Loose
- (1) Cast Aluminum Fuel Fill Dish, Installed (Street-side Front on Pickups / Street-side Rear on Cab Chassis)
Includes subframe and rear bumper. Additional options and features available.
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2014 Freightliner M2 106 Altec Digger Derrick Truck
2014 Freightliner M2 106
6.7L Cummins Turbo Diesel
Odometer reads: 47,519 Miles
Allison Automatic Transmission
4×2
-Exhaust Brake
WB: 190”
GVWR: 33,000lbs
Air Brakes
Trailer Air Hook Up
Pintle Hitch
Bench Seat
A/C and Heat
AM/FM Radio
Total Bed Length: 14’8″
Utility Storage Bed Compartments
Rear Bumper Hydraulic Tool Outlet
Good Tires all around
Equipped with the following:
Altec DM47B-TR Digger Derrick Unit
-Sheave Height: 47’
-Max Lifting Capacity: 23,790lbs
-3 Sheaves
-Ride on Operating Station
-Rear Winch
-Hydraulic Auger Motor w/ 18” Auger Bit
-Pole Grabs
-4 Outriggers
-Insulated and rated for 46kv
Altec Boom was ANSI/Dielectrically Tested!
Truck was Serviced, Greased, and Vehicle Inspected!
2011 Hyster E80Z EP Electric Forklift
2011 Hyster E80Z EP
Powered by 36V Battery System (Includes Charger)
Hour meter reads: 6,117
8,000lb lifting capacity
3 Stage Mast
195” max lifting height
48” Forks w/ 46“ Mast
Power Shift Mast + Power Shift Forks
Solid Rubber Tires
Unit Weight: 14,500lbs
Greased
Runs and Operates!
2013 Yale ERCO65VGN48TE083 Electric Forklift
2013 Yale ERCO65VGN48TE083
Powered by 48V Battery System (Charger NOT Included)
Hour meter reads: 13,738
6,000lb Lifting Capacity
3 Stage Mast
175“ Max Lifting Height
32” Forks
Cascade 28G-FDS-160 Double Pallet Extendable Mast (See info below)
42” Main Mast w/ 26” outside to outside of forks and 80” Outside to Outside of Mast when extended)
Power Shift Forks and Mast
Sold Rubber non marking tires
Unit Weight: 12,785lbs
Greased
Runs and Operates!
2014 Freightliner 114SD Hiab Knuckle Boom Crane Truck
2014 Freightliner 114SD
Detroit DD13 Turbo Diesel
-500hp
Odometer reads: 183,095 Miles
Total Engine Hours: 8,006
Eaton 10 Speed Transmission
Tandem Axle with Drop Tag Axle
GVWR: 66,000lbs
Axle Capacity Front: 20,000lbs
Axle Capacity Rear: 46,000lbs
Locking Rear Diff
Locking Interaxle Diff
Gear Ratio: 4.10
Engine Brake
WB: 288″
Air Brakes
Pintle Hitch
A/C and Heat
AM/FM Radio
Air Ride Driver Seat
Power Windows
Air Ride Cab
20’ Flatbed
Good Tires all around
Equipped with the following:
-Hiab 322E-5 Hi-Pro Knuckle Boom Crane
-72′ Vertical Reach
-64’5” Side Reach
-20,500lb Lifting Capacity (Minus Jib)
-1,490lbs at 64’5” side reach
-2x Outriggers
-Lever Lowers
-Wireless Remote Control
Hiab Crane will be ANSI Inspected before sold!
Truck will be Serviced, Greased, and Vehicle Inspected before sold!
Recent Comments