2026 Duramag Aluminum Flatbed TB08184-AL Truck Body
- All Extruded 6005 T6 Alum Box Tube Construction
- Long Sills to Compensate for Hump in Truck Frame
- G-Tube Perimeter Frame
- Extruded Aluminum Headboard w/Accessory Track
- OEM Plug & Play Wire Harness – Body End
- Cast Aluminum Fuel Fill Dish – Streetside Fronts
- 12″ Diamond Plate Apron
- 2×3.188 Long Sills
- 1.5″ x 3.125 Cross Members, 16″ OC
- T&G Extruded Alum Flooring
- All Pre-Wired w/LED Lights Inside Box Tube
- Stake Pockets & Rub Rail
- Lighted Headboard
*SUBFRAME SOLD SEPARATELY
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2026 Duramag Aluminum Skirted Hauler Bed HBTB09795SB Truck Body
- 18,000 lbs. 2.5” Receiver Hitch with 3-way Receptacle
- 2” x 4” Box Tube Steel Sub Frame
- Aluminum 2” x 3” Box Tube Cross Members
- 3 ½” x 3 ½” Integrated Steel Rear Bumper
- Headboard with Accessory Glide Track
- 30,000 lbs. Gooseneck hitch, compatible with B&W Gooseneck hitch accessories
- Fully Powder Coated Steel Subframe
- Cast Aluminum License Plate Holder
- Extruded Aluminum Flooring
- Skirted Sides with storage
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2026 Duramag Aluminum 9′ Dump Bed DB0969520SS with hoist
- All Extruded 6005 T6 Aluminum Construction
- 2×6 .250 Long Sills
- Extruded Unibody Floor with 2.5″ OC Bracing
- Rugged & Attractive Formed Side Walls
- Double Walled Sides (Eliminates Cargo Impact Printing)
- HD 4×6 .188 Rear Corner Posts
- Double Walled Tailgate with Stainless Hinge Pins
- Stainless Tailgate Actuator Hardware & Fasteners
- All Pre Wired with LED Lights Inside Box Tube
- Aluminum Cab Shield
- 20″ Sides
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2026 Duramag Aluminum Flatbed HBTB09795 Truck Body
- 18,000 lbs. 2.5” Receiver Hitch with 3-way Receptacle
- 2” x 4” Box Tube Steel Sub Frame
- Aluminum 2” x 3” Box Tube Cross Members
- 3 ½” x 3 ½” Integrated Steel Rear Bumper
- Headboard with Accessory Glide Track
- 30,000 lbs. Gooseneck hitch, compatible with B&W Gooseneck hitch accessories
- Fully Powder Coated Steel Subframe
- Cast Aluminum License Plate Holder
- Extruded Aluminum Flooring
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
DownEaster 11′ Steel Dump Body DED11396
- 10 gauge construction throughout
- Dirt shedding , sloped design at side plate and tailgate top
- Double panel side plates equal over 1/4″ thickness.
- Full depth 3/16″rear corner pillars incorporate recessed lighting, keyhole banjo eyes and lower tailgate pin receiver.
- All lighting is LED rubber mounted and NTEA and Federal compliant.
- 2 1/2″ shorter deck height (9′ only)
- Mounting height of 9.5″ chassis to floor (9′ only)
- 10″ board extension pockets ease of install & future optional / custom overhang.
- Self aligning rear latch release for the top gate pins
- Integrated tarp hooks
- DuPont™ Imron® Elite black oven cured paint w/ epoxy primer
FLOOR & UNDERSTRUCTURE
- 4″ x 5.7# Channel long sills and 3″ channel cross members (9′)
- 6″ x 8.2# Channel long sills (10′, 10.5′ 11′)
- 3/16″ Stainless formed 7″ long sills (SS body)
- 3″ stainless tubing, interlaced cross members (SS body)
- Two piece 10 gauge floor with 45 degree slopped corners where meets seamless side plate.
- Greasable Bronze bearings for underbody release mechanisms
TAILGATE
- Formed 10 gauge inner, outer and end panels.
- 1″ hardened pins, (1″ Stainless) with plasma cut latch receiving lock fingers
- Adjustable 1/4″ chain for spreading aggregate material & holding gate in down position
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
DownEaster 12′ Landscape Dump Body DELD1296
- 5″ x 6.7# Channel long sills
- 3″ x 4.1# Channel cross members
- 10GA floor, 2 pc
- 12GA side plates & bulkhead
- 52″ Curb side door, standard
- Structural tubing corner posts
- 3/16″ thick rear cross member/apron with
- tail and reverse light knockouts
- 3/8″ D rings at each inside corner
- All lighting is LED rubber mounted and NTEA and Federal
- compliant.
- Class 20 & 40 (single cylinder) hoists available
- Mounted & painted Sub frame for ease of installation
- Mounting hardware and brackets provided
- Epoxy primer with Phosphate prewash
- Imron® Elite black oven
- cured paint w/ epoxy primer
- Cab Shield
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2026 DownEaster 11′ Stainless Dump Body DEDS11396
- 10 gauge construction throughout
- Dirt shedding , sloped design at side plate and tailgate top
- Double panel side plates equal over 1/4″ thickness.
- Full depth 3/16″rear corner pillars incorporate recessed lighting, keyhole banjo eyes and lower tailgate pin receiver.
- All lighting is LED rubber mounted and NTEA and Federal compliant.
- 2 1/2″ shorter deck height (9′ only)
- Mounting height of 9.5″ chassis to floor (9′ only)
- 10″ board extension pockets ease of install & future optional / custom overhang.
- Self aligning rear latch release for the top gate pins
- Integrated tarp hooks
- DuPont™ Imron® Elite black oven cured paint w/ epoxy primer
FLOOR & UNDERSTRUCTURE
- 4″ x 5.7# Channel long sills and 3″ channel cross members (9′)
- 6″ x 8.2# Channel long sills (10′, 10.5′ 11′)
- 3/16″ Stainless formed 7″ long sills (SS body)
- 3″ stainless tubing, interlaced cross members (SS body)
- Two piece 10 gauge floor with 45 degree slopped corners where meets seamless side plate.
- Greasable Bronze bearings for underbody release mechanisms
TAILGATE
- Formed 10 gauge inner, outer and end panels.
- 1″ hardened pins, (1″ Stainless) with plasma cut latch receiving lock fingers
- Adjustable 1/4″ chain for spreading aggregate material & holding gate in down position
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2025 Norstar Deluxe Flatbed SL0868456 Truck Body
*Fits – 99-16 Ford 8′ SRW & GMC/Chevy 8′ SRW all years
Structural Steel Frame
4’’ Channel Runners
2.5” 18.5k Rated Receiver
30k Rated 2 5/16” B&W turn over Gooseneck
Formed 3 x 3/16” Channel Cross Members
Steel Tube Head Rack with Cross Bars, Tail & Rev. Lights
Steel 1/8” Diamond Plate Floor
Built in Gooseneck Well with Ball Mounted & Diam Plate Lid
Angled Fuel Filler Neck & DEF Ready
4 Tool Boxes & Locking Chrome Paddle Latches (6 on 11’4”)
Skirted Rear Bumper with Anti-Slip Step
12Ga Steel Construction with 11Ga Bumper
Adjustable Black Smooth Fender Flares
3/4” LED Marker Lights
4 Clear 6” Oval LED Reverse Lights
6 Red 6” Oval LED ST/TL/TN Lights
Single LED License Plate Light
Side & Rear Reflectors
Primer & Powder Coated Black
All Lighting DOT Approved
Molded Sealed Harness with Resistors
7 Way Receiver Female Plug with Adapter
7 Way Plug in Gooseneck Well
Adjustable Galvanized Shelf in Front Tool Boxes
Mudflap Brackets
2025 Norstar Deluxe Hauler WH0868456 Truck Body
Structural Steel Frame
2.5” 18.5k Rated Receiver
30k Rated 2 5/16” GN Ball
Formed 3 x 3/16” Channel Cross Members
Steel Tube Head Rack with Cross Bars, Tail & Rev. Lights
Built-in Gooseneck Well with Ball Mounted & Diam Plate Lid
Skirted Rear Bumper with Anti-Slip Step
2 Aluminum Cast Angled Fuel Fillers
Aluminum Cast Tail Light Housing
Aluminum Cast License Plate Housing
Aluminum Trim Package
11Ga Steel Construction with 10Ga Bumper
4 Side Swing Tool Box Doors with Chrome Hinges (Except Megacab)
7 Way Plug in Gooseneck Trough
4 Recessed D-Rings
18” Gooseneck Trough
Dove Tail
Primer & Powder Coated Black
Chrome Accent Lighting
2.5” LED Reflective Marker Lights
4 Clear 6” Oval LED Rev. Lights
6 Red 6” Oval LED ST/TL/TN Lights
Single LED License Plate Light
All Lighting DOT Approved
Molded Sealed Harness with resistors
4/5 & 7 Way Receiver Female Plug with Adapter
Mudflap Brackets
Steel 1/8” Diamond Plate Floor
Not sure which truck bed is right for you? Give us a call at 603.417.2112
2025 Norstar Flatbed SR0949760 Truck Body
Adjustable Runners 4″ x 38″ – 42″
Standard 24″ OC Cross Members
Diam Plate Steel .125″ Flat Deck w/ GN Cap
Side Stake Pockets & Rub Rail
Standard 3.5″ Tube x 37.75″ Head Rack
2 5/16″ Raw Steel 1″ Raised 30k Ball
4/5/7 Way Plug Rear & 7 Way Plug in Gooseneck Well
Standard LED Light Package
Adjustable Mud Flap Mounting Brackets L & R
Color: Black
Not sure which truck bed is right for you? Give us a call at 603.417.2112
Recent Comments