2026 PJ Tradesman Hauler Bed GT-02975742DLX Long bed Dually
- Available Lengths – 84”, 8’6”, 9’4”, 11’4”
- Headache Rack – Steel Tube
- Lighting – 6” Glow Oval LED
- Deck – 1/8” Steel Tread Plate
- Frame Rails – 4” Structural Channel Steel
- Crossmembers – 3” Steel Channel Stel
- Rear Skirt– Solid one piece with tapered corners for turning radius with recessed steps
- GN Hitch – 30k lbs. B&W gooseneck hitch with welded ball
- Rear Receiver – 24k lbs. B&W 2.5” receiver
- Fuel Fill – Angled
- 12v Trailer Plug – Round 7 pin RV style in GN well, 7 pin / 4 way combo on rear
- Light Box – Steel
- Marker Lighting – Bullet LED
- Rear Lighting – 6” Oval LED
- Toolbox – 2 Large front utility boxes, 2 low-profile rear toolboxes, 2 3/4 length shovel boxes
- Fenders – Steel
- Tie Downs – 18” Airline track tie-downs with 4 attachment rings
- Side Steps – In front and rear of fenders
Not sure which truck bed is right for you? Give us a call at 603.417.2112
Installation available!
2026 PJ Skirted Flatbed GS-02845742 Long Bed
- Available Lengths – 84”, 8’6”, 9’4”, 11’4”
- Headache Rack – Steel Tube
- Lighting – 6” Glow Oval LED
- Deck – 1/8” Steel Tread Plate
- Frame Rails – 4” Structural Channel Steel
- Crossmembers – 3” Steel Channel Stel
- Rear Skirt– Solid one piece with tapered corners for turning radius with recessed steps
- GN Hitch – 30k lbs. B&W gooseneck hitch with welded ball
- Rear Receiver – 24k lbs. B&W 2.5” receiver
- Fuel Fill – Angled
- 12v Trailer Plug – Round 7 pin RV style in GN well, 7 pin / 4 way combo on rear
- Light Box – Steel
- Marker Lighting – Bullet LED
- Rear Lighting – 6” Oval LED
- Toolbox – 4 Lockable flush-mounted toolboxes
- Fenders – Steel
- Side Steps – In front and rear of fenders
Not sure which truck bed is right for you? Give us a call at 603.417.2112
Installation available!
2026 PJ Steel Skirted Flatbed GS-01844042 Short bed
- Available Lengths – 84”, 8’6”, 9’4”, 11’4”
- Headache Rack – Steel Tube
- Lighting – 6” Glow Oval LED
- Deck – 1/8” Steel Tread Plate
- Frame Rails – 4” Structural Channel Steel
- Crossmembers – 3” Steel Channel Stel
- Rear Skirt– Solid one piece with tapered corners for turning radius with recessed steps
- GN Hitch – 30k lbs. B&W gooseneck hitch with welded ball
- Rear Receiver – 24k lbs. B&W 2.5” receiver
- Fuel Fill – Angled
- 12v Trailer Plug – Round 7 pin RV style in GN well, 7 pin / 4 way combo on rear
- Light Box – Steel
- Marker Lighting – Bullet LED
- Rear Lighting – 6” Oval LED
- Toolbox – 4 Lockable flush-mounted toolboxes
- Fenders – Steel
- Side Steps – In front and rear of fenders
Not sure which truck bed is right for you? Give us a call at 603.417.2112
Installation available!
2016 International 7400 Altec Corner Mount Digger Derrick Truck
2016 International 7400
International Nav9 Turbo Diesel
Odometer reads: 43,808 Miles
Allison Automatic Transmission
4×2
WB: 195”
GVWR: 33,000lbs
Air Brakes
Trailer Air Hook Up
Pintle Hitch
Air Ride Driver + Passenger Seat
A/C and Heat
AM/FM Radio
Total Bed Length: 14′ _
Utility Storage Bed Compartments
Rear Hydraulic Tool Outlet
Pole Carrier Rack
Good Tires all around
Equipped with the following:
Altec DM47B-BC Digger Derrick Unit
-Sheave Height: 47’
-Max Lifting Capacity: 17,730lbs
-3 Sheaves
-Rear Corner Pedestal Controls
-Tip Winch
-Hydraulic Auger Motor w/ 18” Auger Bit_
-Pole Grabs
-4 Outriggers
-Insulated and rated for 46kv
Altec Boom will be ANSI/Dielectrically tested before sold! Truck will be Serviced, Greased and Vehicle Inspected before sold!
2019 International 4300 Altec Material Handler Bucket Truck
2019 International 4300
Cummins 6.7L Turbo Diesel
Allison Automatic Transmission
Odometer Reads: 147,621
PTO Hours: 2,911
4×2
WB: 197”
GVWR: 33,000lbs
Air Brakes
Trailer Air Supply
Pintle Hitch
Exhaust Brake
Locking Rear Diff
Air Ride Driver Seat + Passenger Bench Seat_
A/C + Heat
AM/FM Radio
Reverse Camera_
Total Bed Length: 16′ (14′ Utility Bed + 2′ Rear Deck Space)_
Strobe Lights
Good Tires all around!
Equipped with the following:
Altec AA55E-OC Boom
56’ Platform Height / 61’ Working Height
-Rear Mounted Boom
Single Man Bucket
-Rated for 400lbs
Hydraulic Tool Circuit at platform
Material Handling System
-Rated for 2,000lbs
Boom is insulated for 46kv
Hydraulic Platform Rotation/Tilt
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at All Upper and Lower Control Station
Altec Boom will be ANSI/Dielectrically tested before sold!
Truck will be Serviced, Greased and Vehicle Inspected before sold!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2015+ INQUIRE FOR MORE DETAILS!
2019 Freightliner M2 106 Altec Material Handler Bucket Truck
2019 Freightliner M2 106
Cummins 6.7L Turbo Diesel
Allison Automatic Transmission
Odometer Reads: 89,433
4×2
WB: 190”
GVWR: 33,000lbs
Air Brakes
Trailer Air Supply
Pintle Hitch
Exhaust Brake
Bench Seat
A/C + Heat
AM/FM Radio
Total Bed Length: 16′ (14′ Utility Bed + 2′ Rear Deck Space)_
Strobe Lights
Good Tires all around!
Equipped with the following:
Altec AA55 Boom
56’ Platform Height / 61’ Working Height
-Rear Mounted Boom
Two Man Bucket
-Rated for 700lbs
Hydraulic Tool Circuit at platform
Material Handling System
-Rated for 2,000lbs
Boom is insulated for 46kv
Hydraulic Platform Rotation/Tilt
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at All Upper and Lower Control Station
Altec Boom was ANSI/Dielectrically tested!
Truck was Serviced, Greased and Vehicle Inspected!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2015+ INQUIRE FOR MORE DETAILS!
2020 Freightliner M2 106 Altec Material Handler Bucket Truck
2020 Freightliner M2 106
Cummins 6.7L Turbo Diesel
Allison Automatic Transmission
Odometer Reads: 72,515 Miles
4×2
WB: 190”
GVWR: 33,000lbs
Air Brakes
Trailer Air Hook Up
Pintle Hitch
Exhaust Brake
Locking Rear Diff
Bench Seat
A/C + Heat
AM/FM Radio
14′ Utility Service Bed w/ Storage Compartments
Strobe Lights
Good Tires all around!
Equipped with the following:
Altec AM55E Boom
56’ Platform Height / 61’ Working Height
-Rear Mounted Boom
Two Man Bucket
-Rated for 600lbs
Hydraulic Tool Circuit at platform
Material Handling System
-Rated for 2,000lbs
Boom is insulated for 46kv
Hydraulic Platform Rotation/Tilt
Continuous Rotation
4 Outriggers
Upper and Lower Controls
-Lever Lower Controls
-Pistol Grip Upper Controls
Emergency Stop Valve at Upper and Lower Control Station
Altec boom was ANSI/Dielectrically tested!
Truck was Serviced, Greased and Vehicle Inspected!
WE OFFER CUSTOMIZABLE AFTERMARKET WARRANTIES FOR 2015+ INQUIRE FOR MORE DETAILS!
2017 Ford F550XL Altec Utility Bucket Truck
2017 Ford F550XL
6.7L Powerstroke Turbo Diesel
Automatic Transmission
Odometer reads: 80,779 Miles
4×2
A/C and Heat
AM/FM radio
Hydraulic Brakes
Bench Seat
18,000 GVWR
Pintle Hitch
9′ Utility Storage Box + 3′ Rear Bumper Platform
-w/ Material Storage Bins
Strobe Light
New Brake Pads and Rotors all around!
New Rear tires! Fronts like new!
Equipped with the following:
Altec AT40-G Boom
40’ Platform Height / 45’ Working Height
-Center Mounted Boom
Man a Half Bucket
-Rated for 400lbs
Hydraulic Platform Tilt
Hydraulic Platform Rotation
Hydraulic Tool outlets at bucket
Boom is insulated and rated for 46KV
Continuous Rotation
Upper and Lower Controls
-Lever Lowers
-Pistol Grip Uppers
Emergency Stop Valve at upper and lower controls
Altec boom was ANSI/Dielectrically tested!
Truck was Serviced, Greased and Vehicle Inspected!
2016 Ford 550XL Utility Service Box Truck
2016 Ford 550XL
Powerstroke 6.7L Turbo Diesel
Miles: 77,765
Automatic Transmission
A/C and Heat
AM/FM radio
Reverse Camera
Power Windows and Locks
Bench Seat
Hydraulic Brakes
GVWR: 19,500
WB: 201”
Rear Hitch Receiver
Rear Bumper Vise
Good tires all around!
Equipped with the following:
17′ Dejana Van Utility Body
-8 Power Remote Locking External Toolboxes
-Rear Access Roll Up Door
Truck was Serviced, Greased and Vehicle Inspected!
SwapHogg 12′ Chipper Body DESH1250 SDT-S/CT1294
Standard Features
- 12′ Container with bolt on Chipper top
- Integrated ladder rack
- Vented Side walls
- Single door
- 3″ Structural channel
- cross members spaced 16″ on center
- Floor constructed with 10 GA steel
- Front, side, & gate panels
- constructed with 12 GA steel
- Doors constructed with 3″x 3″ tubing
- Rear posts constructed with 3/16″ steel
- Front & side top rails constructed with
- 3″x 3″ tubing
- PPG cured paint w/ corrosion resistant epoxy primer
- Steel ground rollers
- Compatible with SwapHogg and Switch & Go systems
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112
Recent Comments